Add the build infrastructure for compilation of StandaloneMm image files and FD file.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sughosh Ganu <sughosh.g...@arm.com> --- Platform/ARM/SgiPkg/PlatformStandaloneMm.dsc | 130 +++++++++++++++++++++++++++ Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf | 100 +++++++++++++++++++++ 2 files changed, 230 insertions(+) create mode 100644 Platform/ARM/SgiPkg/PlatformStandaloneMm.dsc create mode 100644 Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf diff --git a/Platform/ARM/SgiPkg/PlatformStandaloneMm.dsc b/Platform/ARM/SgiPkg/PlatformStandaloneMm.dsc new file mode 100644 index 000000000000..4615c383c46a --- /dev/null +++ b/Platform/ARM/SgiPkg/PlatformStandaloneMm.dsc @@ -0,0 +1,130 @@ +# +# Copyright (c) 2018, ARM Limited. All rights reserved. +# +# This program and the accompanying materials are licensed and made available +# under the terms and conditions of the BSD License which accompanies this +# distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# + +################################################################################ +# +# Defines Section - statements that will be processed to create a Makefile. +# +################################################################################ +[Defines] + PLATFORM_NAME = sgi_mm_standalone + PLATFORM_GUID = 34B78C8F-CFD5-49D5-8360-E91143F6106D + PLATFORM_VERSION = 1.0 + DSC_SPECIFICATION = 0x00010011 + OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME) + SUPPORTED_ARCHITECTURES = AARCH64|ARM + BUILD_TARGETS = DEBUG|RELEASE + SKUID_IDENTIFIER = DEFAULT + FLASH_DEFINITION = Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf + DEFINE DEBUG_MESSAGE = TRUE + + # LzmaF86 + DEFINE COMPRESSION_TOOL_GUID = D42AE6BD-1352-4bfb-909A-CA72A6EAE889 + +################################################################################ +# +# Library Class section - list of all Library Classes needed by this Platform. +# +################################################################################ +[LibraryClasses] + # + # Basic + # + BaseLib|MdePkg/Library/BaseLib/BaseLib.inf + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf + DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf + DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf + FvLib|StandaloneMmPkg/Library/FvLib/FvLib.inf + HobLib|StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.inf + IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf + MemLib|StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.inf + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.inf + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf + PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf + ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf + + # + # Entry point + # + StandaloneMmDriverEntryPoint|StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf + +[LibraryClasses.AARCH64] + ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf + StandaloneMmMmuLib|ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf + ArmSvcLib|ArmPkg/Library/ArmSvcLib/ArmSvcLib.inf + CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf + PeCoffExtraActionLib|StandaloneMmPkg/Library/StandaloneMmPeCoffExtraActionLib/StandaloneMmPeCoffExtraActionLib.inf + + # ARM PL011 UART Driver + PL011UartClockLib|ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf + PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf + SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf + + StandaloneMmCoreEntryPoint|StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf + +################################################################################ +# +# Pcd Section - list of all EDK II PCD Entries defined by this Platform +# +################################################################################ +[PcdsFeatureFlag] + gStandaloneMmPkgTokenSpaceGuid.PcdStandaloneMmEnable|TRUE + +[PcdsFixedAtBuild] + gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800000CF + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xff + gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x0f + +[PcdsFixedAtBuild.AARCH64] + ## PL011 - Serial Terminal + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x7FF70000 + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200 + +################################################################################################### +# +# Components Section - list of the modules and components that will be processed by compilation +# tools and the EDK II tools to generate PE32/PE32+/Coff image files. +# +# Note: The EDK II DSC file is not used to specify how compiled binary images get placed +# into firmware volume images. This section is just a list of modules to compile from +# source into UEFI-compliant binaries. +# It is the FDF file that contains information on combining binary files into firmware +# volume images, whose concept is beyond UEFI and is described in PI specification. +# Binary modules do not need to be listed in this section, as they should be +# specified in the FDF file. For example: Shell binary (Shell_Full.efi), FAT binary (Fat.efi), +# Logo (Logo.bmp), and etc. +# There may also be modules listed in this section that are not required in the FDF file, +# When a module listed here is excluded from FDF file, then UEFI-compliant binary will be +# generated for it, but the binary will not be put into any firmware volume. +# +################################################################################################### +[Components.common] + # + # MM Core + # + StandaloneMmPkg/Core/StandaloneMmCore.inf + +[Components.AARCH64] + StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf + +################################################################################################### +# +# BuildOptions Section - Define the module specific tool chain flags that should be used as +# the default flags for a module. These flags are appended to any +# standard flags that are defined by the build process. They can be +# applied for any modules or only those modules with the specific +# module style (EDK or EDKII) specified in [Components] section. +# +################################################################################################### +[BuildOptions.AARCH64] +GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000 -march=armv8-a+nofp diff --git a/Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf b/Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf new file mode 100644 index 000000000000..6b9d1e703869 --- /dev/null +++ b/Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf @@ -0,0 +1,100 @@ +# +# Copyright (c) 2018, ARM Limited. All rights reserved. +# +# This program and the accompanying materials are licensed and made available +# under the terms and conditions of the BSD License which accompanies this +# distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# + +################################################################################ +# +# FD Section +# The [FD] Section is made up of the definition statements and a +# description of what goes into the Flash Device Image. Each FD section +# defines one flash "device" image. A flash device image may be one of +# the following: Removable media bootable image (like a boot floppy +# image,) an Option ROM image (that would be "flashed" into an add-in +# card,) a System "Flash" image (that would be burned into a system's +# flash) or an Update ("Capsule") image that will be used to update and +# existing system flash. +# +################################################################################ + +[FD.BL32_AP_MM] +BaseAddress = 0xff200000|gArmTokenSpaceGuid.PcdFdBaseAddress # UEFI in DRAM + 128MB. +Size = 0x00e00000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (64MiB). +ErasePolarity = 1 + +# This one is tricky, it must be: BlockSize * NumBlocks = Size +BlockSize = 0x00001000 +NumBlocks = 0x0e00 + +0x00000000|0x00280000 +gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize +FV = FVMAIN_COMPACT + +[FV.FVMAIN_COMPACT] +FvAlignment = 16 +ERASE_POLARITY = 1 +MEMORY_MAPPED = TRUE +STICKY_WRITE = TRUE +LOCK_CAP = TRUE +LOCK_STATUS = TRUE +WRITE_DISABLED_CAP = TRUE +WRITE_ENABLED_CAP = TRUE +WRITE_STATUS = TRUE +WRITE_LOCK_CAP = TRUE +WRITE_LOCK_STATUS = TRUE +READ_DISABLED_CAP = TRUE +READ_ENABLED_CAP = TRUE +READ_STATUS = TRUE +READ_LOCK_CAP = TRUE +READ_LOCK_STATUS = TRUE + +INF StandaloneMmPkg/Core/StandaloneMmCore.inf +INF StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf + +################################################################################ +# +# Rules are use with the [FV] section's module INF type to define +# how an FFS file is created for a given INF file. The following Rule are the default +# rules for the different module type. User can add the customized rules to define the +# content of the FFS file. +# +################################################################################ + + +############################################################################ +# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # +############################################################################ +# +#[Rule.Common.DXE_DRIVER] +# FILE DRIVER = $(NAMED_GUID) { +# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex +# COMPRESS PI_STD { +# GUIDED { +# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi +# UI STRING="$(MODULE_NAME)" Optional +# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) +# } +# } +# } +# +############################################################################ + +[Rule.Common.MM_CORE_STANDALONE] + FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED { + PE32 PE32 Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi + } + +[Rule.Common.MM_STANDALONE] + FILE MM_STANDALONE = $(NAMED_GUID) { + SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi + UI STRING="$(MODULE_NAME)" Optional + VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) + } -- 2.7.4 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
