Hi Ard,
Some minor feedback added inline.
On 2019/1/4 2:28, Ard Biesheuvel wrote:
In preparation of providing a standalone MM based variable runtime
driver, move the existing SMM driver to the new MM services table,
and factor out some pieces that are specific to the traditional
driver, mainly related to the use of UEFI boot services, which are
not accessible to standalone MM drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheu...@linaro.org>
---
MdeModulePkg/Universal/Variable/RuntimeDxe/TcgMorLockSmm.c | 18 +---
MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.h | 50
+++++++++
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.c | 59
++++------
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf | 5 +-
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableTraditionalMm.c | 114
++++++++++++++++++++
5 files changed, 187 insertions(+), 59 deletions(-)
diff --git a/MdeModulePkg/Universal/Variable/RuntimeDxe/TcgMorLockSmm.c
b/MdeModulePkg/Universal/Variable/RuntimeDxe/TcgMorLockSmm.c
index 28aa2893c6f8..009d96c3a65e 100644
--- a/MdeModulePkg/Universal/Variable/RuntimeDxe/TcgMorLockSmm.c
+++ b/MdeModulePkg/Universal/Variable/RuntimeDxe/TcgMorLockSmm.c
@@ -21,7 +21,6 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
EXPRESS OR IMPLIED.
#include <Library/DebugLib.h>
#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
#include "Variable.h"
typedef struct {
@@ -419,8 +418,6 @@ MorLockInitAtEndOfDxe (
{
UINTN MorSize;
EFI_STATUS MorStatus;
- EFI_STATUS TcgStatus;
- VOID *TcgInterface;
if (!mMorLockInitializationRequired) {
//
@@ -458,20 +455,7 @@ MorLockInitAtEndOfDxe (
// can be deduced from the absence of the TCG / TCG2 protocols, as edk2's
// MOR implementation depends on (one of) those protocols.
//
- TcgStatus = gBS->LocateProtocol (
- &gEfiTcg2ProtocolGuid,
- NULL, // Registration
- &TcgInterface
- );
- if (EFI_ERROR (TcgStatus)) {
- TcgStatus = gBS->LocateProtocol (
- &gEfiTcgProtocolGuid,
- NULL, // Registration
- &TcgInterface
- );
- }
-
- if (!EFI_ERROR (TcgStatus)) {
+ if (VariableHaveTcgProtocols ()) {
//
// The MOR variable originates from the platform firmware; set the MOR
// Control Lock variable to report the locking capability to the OS.
diff --git a/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.h
b/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.h
index 938eb5de61fa..11822575ac4d 100644
--- a/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.h
+++ b/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.h
@@ -924,4 +924,54 @@ VariableExLibAtRuntime (
VOID
);
+/**
+ Notify the system that the SMM variable driver is ready
+**/
+VOID
+VariableNotifySmmReady (
+ VOID
+ );
+
+/**
+ Notify the system that the SMM variable write driver is ready
+**/
+VOID
+VariableNotifySmmWriteReady (
+ VOID
+ );
+
+/**
+ Variable service MM driver entry point
+**/
+EFI_STATUS
+EFIAPI
+MmVariableServiceInitialize (
+ VOID
+ );
+
+/**
+ This function check if the buffer is valid per processor architecture and
not overlap with SMRAM.
+
+ @param Buffer The buffer start address to be checked.
+ @param Length The buffer length to be checked.
+
+ @retval TRUE This buffer is valid per processor architecture and not
overlap with SMRAM.
+ @retval FALSE This buffer is not valid per processor architecture or overlap
with SMRAM.
+**/
+BOOLEAN
+VariableSmmIsBufferOutsideSmmValid (
+ IN EFI_PHYSICAL_ADDRESS Buffer,
+ IN UINT64 Length
+ );
+
+/**
+ Whether the TCG or TCG2 protocols are installed in the UEFI protocol
database.
+ This information is used by the MorLock code to infer whether an existing
+ MOR variable is legitimate or not.
Add a line for return description?
+**/
+BOOLEAN
+VariableHaveTcgProtocols (
+ VOID
+ );
+
#endif
diff --git a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.c
b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.c
index 8c53f84ff6e8..7245587052df 100644
--- a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.c
+++ b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.c
@@ -15,6 +15,7 @@
SmmVariableGetStatistics() should also do validation based on its own
knowledge.
Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2018, Linaro, Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD
License
which accompanies this distribution. The full text of the license may be
found at
@@ -28,18 +29,15 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
EXPRESS OR IMPLIED.
#include <Protocol/SmmVariable.h>
#include <Protocol/SmmFirmwareVolumeBlock.h>
#include <Protocol/SmmFaultTolerantWrite.h>
-#include <Protocol/SmmEndOfDxe.h>
+#include <Protocol/MmEndOfDxe.h>
#include <Protocol/SmmVarCheck.h>
-#include <Library/SmmServicesTableLib.h>
-#include <Library/SmmMemLib.h>
+#include <Library/MmServicesTableLib.h>
#include <Guid/SmmVariableCommon.h>
#include "Variable.h"
extern VARIABLE_INFO_ENTRY *gVariableInfo;
-EFI_HANDLE mSmmVariableHandle =
NULL;
-EFI_HANDLE mVariableHandle =
NULL;
BOOLEAN mAtRuntime
= FALSE;
UINT8 *mVariableBufferPayload
= NULL;
UINTN
mVariableBufferPayloadSize;
@@ -218,7 +216,7 @@ GetFtwProtocol (
//
// Locate Smm Fault Tolerent Write protocol
//
- Status = gSmst->SmmLocateProtocol (
+ Status = gMmst->MmLocateProtocol (
&gEfiSmmFaultTolerantWriteProtocolGuid,
NULL,
FtwProtocol
@@ -248,7 +246,7 @@ GetFvbByHandle (
//
// To get the SMM FVB protocol interface on the handle
//
- return gSmst->SmmHandleProtocol (
+ return gMmst->MmHandleProtocol (
FvBlockHandle,
&gEfiSmmFirmwareVolumeBlockProtocolGuid,
(VOID **) FvBlock
@@ -287,7 +285,7 @@ GetFvbCountAndBuffer (
BufferSize = 0;
*NumberHandles = 0;
*Buffer = NULL;
- Status = gSmst->SmmLocateHandle (
+ Status = gMmst->MmLocateHandle (
ByProtocol,
&gEfiSmmFirmwareVolumeBlockProtocolGuid,
NULL,
@@ -303,7 +301,7 @@ GetFvbCountAndBuffer (
return EFI_OUT_OF_RESOURCES;
}
- Status = gSmst->SmmLocateHandle (
+ Status = gMmst->MmLocateHandle (
ByProtocol,
&gEfiSmmFirmwareVolumeBlockProtocolGuid,
NULL,
@@ -500,7 +498,7 @@ SmmVariableHandler (
return EFI_SUCCESS;
}
- if (!SmmIsBufferOutsideSmmValid ((UINTN)CommBuffer, TempCommBufferSize)) {
+ if (!VariableSmmIsBufferOutsideSmmValid ((UINTN)CommBuffer,
TempCommBufferSize)) {
DEBUG ((EFI_D_ERROR, "SmmVariableHandler: SMM communication buffer in SMRAM or
overflow!\n"));
return EFI_SUCCESS;
}
@@ -911,13 +909,7 @@ SmmFtwNotificationEvent (
//
// Notify the variable wrapper driver the variable write service is ready
//
- Status = gBS->InstallProtocolInterface (
- &mSmmVariableHandle,
- &gSmmVariableWriteGuid,
- EFI_NATIVE_INTERFACE,
- NULL
- );
- ASSERT_EFI_ERROR (Status);
+ VariableNotifySmmWriteReady ();
return EFI_SUCCESS;
}
@@ -928,18 +920,11 @@ SmmFtwNotificationEvent (
runtime services in the EFI System Table and installs arch protocols
for variable read and write services being available. It also registers
a notification function for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.
-
- @param[in] ImageHandle The firmware allocated handle for the EFI image.
- @param[in] SystemTable A pointer to the EFI System Table.
-
- @retval EFI_SUCCESS Variable service successfully initialized.
-
**/
EFI_STATUS
EFIAPI
-VariableServiceInitialize (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
+MmVariableServiceInitialize (
+ VOID
)
{
EFI_STATUS Status;
@@ -957,7 +942,7 @@ VariableServiceInitialize (
// Install the Smm Variable Protocol on a new handle.
//
VariableHandle = NULL;
- Status = gSmst->SmmInstallProtocolInterface (
+ Status = gMmst->MmInstallProtocolInterface (
&VariableHandle,
&gEfiSmmVariableProtocolGuid,
EFI_NATIVE_INTERFACE,
@@ -965,7 +950,7 @@ VariableServiceInitialize (
);
ASSERT_EFI_ERROR (Status);
- Status = gSmst->SmmInstallProtocolInterface (
+ Status = gMmst->MmInstallProtocolInterface (
&VariableHandle,
&gEdkiiSmmVarCheckProtocolGuid,
EFI_NATIVE_INTERFACE,
@@ -976,7 +961,7 @@ VariableServiceInitialize (
mVariableBufferPayloadSize = GetMaxVariableSize () +
OFFSET_OF
(SMM_VARIABLE_COMMUNICATE_VAR_CHECK_VARIABLE_PROPERTY, Name) -
GetVariableHeaderSize ();
- Status = gSmst->SmmAllocatePool (
+ Status = gMmst->MmAllocatePool (
EfiRuntimeServicesData,
mVariableBufferPayloadSize,
(VOID **)&mVariableBufferPayload
@@ -987,25 +972,19 @@ VariableServiceInitialize (
/// Register SMM variable SMI handler
///
VariableHandle = NULL;
- Status = gSmst->SmiHandlerRegister (SmmVariableHandler,
&gEfiSmmVariableProtocolGuid, &VariableHandle);
+ Status = gMmst->MmiHandlerRegister (SmmVariableHandler,
&gEfiSmmVariableProtocolGuid, &VariableHandle);
ASSERT_EFI_ERROR (Status);
//
// Notify the variable wrapper driver the variable service is ready
//
- Status = SystemTable->BootServices->InstallProtocolInterface (
- &mVariableHandle,
- &gEfiSmmVariableProtocolGuid,
- EFI_NATIVE_INTERFACE,
- &gSmmVariable
- );
- ASSERT_EFI_ERROR (Status);
+ VariableNotifySmmReady ();
//
// Register EFI_SMM_END_OF_DXE_PROTOCOL_GUID notify function.
//
- Status = gSmst->SmmRegisterProtocolNotify (
- &gEfiSmmEndOfDxeProtocolGuid,
+ Status = gMmst->MmRegisterProtocolNotify (
+ &gEfiMmEndOfDxeProtocolGuid,
SmmEndOfDxeCallback,
&SmmEndOfDxeRegistration
);
@@ -1014,7 +993,7 @@ VariableServiceInitialize (
//
// Register FtwNotificationEvent () notify function.
//
- Status = gSmst->SmmRegisterProtocolNotify (
+ Status = gMmst->MmRegisterProtocolNotify (
&gEfiSmmFaultTolerantWriteProtocolGuid,
SmmFtwNotificationEvent,
&SmmFtwRegistration
diff --git a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
index db7d220e06df..ed7392cbcffc 100644
--- a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
+++ b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
@@ -48,6 +48,7 @@ [Defines]
[Sources]
Reclaim.c
Variable.c
+ VariableTraditionalMm.c
VariableSmm.c
VarCheck.c
Variable.h
@@ -66,7 +67,7 @@ [LibraryClasses]
BaseLib
SynchronizationLib
UefiLib
- SmmServicesTableLib
+ MmServicesTableLib
BaseMemoryLib
DebugLib
DxeServicesTableLib
@@ -85,7 +86,7 @@ [Protocols]
## PRODUCES
## UNDEFINED # SmiHandlerRegister
gEfiSmmVariableProtocolGuid
- gEfiSmmEndOfDxeProtocolGuid ## NOTIFY
+ gEfiMmEndOfDxeProtocolGuid ## NOTIFY
gEdkiiSmmVarCheckProtocolGuid ## PRODUCES
gEfiTcgProtocolGuid ## SOMETIMES_CONSUMES
gEfiTcg2ProtocolGuid ## SOMETIMES_CONSUMES
diff --git a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableTraditionalMm.c
b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableTraditionalMm.c
new file mode 100644
index 000000000000..2143d3337e87
--- /dev/null
+++ b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableTraditionalMm.c
@@ -0,0 +1,114 @@
+/** @file
+
+ Parts of the SMM/MM implementation that are specific to traditional MM
+
+Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved. <BR>
+Copyright (c) 2018, Linaro, Ltd. All rights reserved. <BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD
License
+which accompanies this distribution. The full text of the license may be
found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/SmmMemLib.h>
+#include "Variable.h"
+
+BOOLEAN
+VariableSmmIsBufferOutsideSmmValid (
+ IN EFI_PHYSICAL_ADDRESS Buffer,
+ IN UINT64 Length
+ )
+{
+ if (!SmmIsBufferOutsideSmmValid (Buffer, Length)) {
+ DEBUG ((EFI_D_ERROR, "SmmVariableHandler: SMM communication buffer in SMRAM or
overflow!\n"));
Remove this debug message printing code?
+ return FALSE;
+ }
+ return TRUE;
+}
Please add function comment header for it.
+
+/**
+ Notify the system that the SMM variable driver is ready
+**/
+VOID
+VariableNotifySmmReady (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ Handle = NULL;
+ Status = gBS->InstallProtocolInterface (
+ &Handle,
+ &gEfiSmmVariableProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+}
+
+/**
+ Notify the system that the SMM variable write driver is ready
+**/
+VOID
+VariableNotifySmmWriteReady (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ Handle = NULL;
+ Status = gBS->InstallProtocolInterface (
+ &Handle,
+ &gSmmVariableWriteGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+}
+
+EFI_STATUS
+EFIAPI
+VariableServiceInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ return MmVariableServiceInitialize ();
+}
Please add function comment header for it.
+
+/**
+ Whether the TCG or TCG2 protocols are installed in the UEFI protocol
database.
+ This information is used by the MorLock code to infer whether an existing
+ MOR variable is legitimate or not.
Add a line for return description?
Thanks,
Star
+**/
+BOOLEAN
+VariableHaveTcgProtocols (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ VOID *Interface;
+
+ Status = gBS->LocateProtocol (
+ &gEfiTcg2ProtocolGuid,
+ NULL, // Registration
+ &Interface
+ );
+ if (!EFI_ERROR (Status)) {
+ return TRUE;
+ }
+
+ Status = gBS->LocateProtocol (
+ &gEfiTcgProtocolGuid,
+ NULL, // Registration
+ &Interface
+ );
+ return !EFI_ERROR (Status);
+}
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel