REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409

This commit will add the definitions for Storage Security Command (SSC)
PPI. This PPI will be be used to abstract mass storage devices to allow
code running in the PEI phase to send security protocol commands to mass
storage devices without specific knowledge of the type of device or
controller that manages the device.

More specifically, the PPI will provide services to:

* Get the number of mass storage devices managed by a instance of the SSC
  PPI (by service 'GetNumberofDevices');
* Get the identification information (DevicePath) of a managing mass
  storage devices (by service 'GetDevicePath');
* Send security protocol commands to mass storage devices (by services
  'ReceiveData' and 'SendData').

Cc: Jian J Wang <jian.j.w...@intel.com>
Cc: Eric Dong <eric.d...@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a...@intel.com>
Reviewed-by: Ray Ni <ray...@intel.com>
---
 MdeModulePkg/MdeModulePkg.dec                     |   3 +
 MdeModulePkg/Include/Ppi/StorageSecurityCommand.h | 283 ++++++++++++++++++++
 2 files changed, 286 insertions(+)

diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 8efb19e626..7f646d7702 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -483,6 +483,9 @@
   ## Include/Ppi/AtaAhciController.h
   gEdkiiPeiAtaAhciHostControllerPpiGuid     = { 0x61dd33ea, 0x421f, 0x4cc0, { 
0x89, 0x29, 0xff, 0xee, 0xa9, 0xa1, 0xa2, 0x61 } }
 
+  ## Include/Ppi/StorageSecurityCommand.h
+  gEdkiiPeiStorageSecurityCommandPpiGuid    = { 0x35de0b4e, 0x30fb, 0x46c3, { 
0xbd, 0x84, 0x1f, 0xdb, 0xa1, 0x58, 0xbb, 0x56 } }
+
   ## Include/Ppi/AtaPassThru.h
   gEdkiiPeiAtaPassThruPpiGuid               = { 0xa16473fd, 0xd474, 0x4c89, { 
0xae, 0xc7, 0x90, 0xb8, 0x3c, 0x73, 0x86, 0x9  } }
 
diff --git a/MdeModulePkg/Include/Ppi/StorageSecurityCommand.h 
b/MdeModulePkg/Include/Ppi/StorageSecurityCommand.h
new file mode 100644
index 0000000000..cc1688dabb
--- /dev/null
+++ b/MdeModulePkg/Include/Ppi/StorageSecurityCommand.h
@@ -0,0 +1,283 @@
+/** @file
+
+  Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD 
License
+  which accompanies this distribution.  The full text of the license may be 
found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _EDKII_STORAGE_SECURITY_COMMAND_PPI_H_
+#define _EDKII_STORAGE_SECURITY_COMMAND_PPI_H_
+
+#include <Protocol/DevicePath.h>
+
+///
+/// Global ID for the EDKII_PEI_STORAGE_SECURITY_CMD_PPI.
+///
+#define EDKII_PEI_STORAGE_SECURITY_CMD_PPI_GUID \
+  { \
+    0x35de0b4e, 0x30fb, 0x46c3, { 0xbd, 0x84, 0x1f, 0xdb, 0xa1, 0x58, 0xbb, 
0x56 } \
+  }
+
+//
+// Forward declaration for the EDKII_PEI_STORAGE_SECURITY_CMD_PPI.
+//
+typedef struct _EDKII_PEI_STORAGE_SECURITY_CMD_PPI  
EDKII_PEI_STORAGE_SECURITY_CMD_PPI;
+
+//
+// Revision The revision to which the Storage Security Command interface 
adheres.
+//          All future revisions must be backwards compatible.
+//          If a future version is not back wards compatible it is not the 
same GUID.
+//
+#define EDKII_STORAGE_SECURITY_PPI_REVISION  0x00010000
+
+
+/**
+  Gets the count of storage security devices that one specific driver detects.
+
+  @param[in]  This               The PPI instance pointer.
+  @param[out] NumberofDevices    The number of storage security devices 
discovered.
+
+  @retval EFI_SUCCESS              The operation performed successfully.
+  @retval EFI_INVALID_PARAMETER    The parameters are invalid.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_STORAGE_SECURITY_GET_NUMBER_DEVICES) (
+  IN  EDKII_PEI_STORAGE_SECURITY_CMD_PPI    *This,
+  OUT UINTN                                 *NumberofDevices
+  );
+
+/**
+  Gets the device path of a specific storage security device.
+
+  @param[in]  This                 The PPI instance pointer.
+  @param[in]  DeviceIndex          Specifies the storage security device to 
which
+                                   the function wants to talk. Because the 
driver
+                                   that implements Storage Security Command 
PPIs
+                                   will manage multiple storage devices, the 
PPIs
+                                   that want to talk to a single device must 
specify
+                                   the device index that was assigned during 
the
+                                   enumeration process. This index is a number 
from
+                                   one to NumberofDevices.
+  @param[out] DevicePathLength     The length of the device path in bytes 
specified
+                                   by DevicePath.
+  @param[out] DevicePath           The device path of storage security device.
+                                   This field re-uses EFI Device Path Protocol 
as
+                                   defined by Section 10.2 EFI Device Path 
Protocol
+                                   of UEFI 2.7 Specification.
+
+  @retval EFI_SUCCESS              The operation succeeds.
+  @retval EFI_INVALID_PARAMETER    DevicePathLength or DevicePath is NULL.
+  @retval EFI_NOT_FOUND            The specified storage security device not 
found.
+  @retval EFI_OUT_OF_RESOURCES     The operation fails due to lack of 
resources.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_STORAGE_SECURITY_GET_DEVICE_PATH) (
+  IN  EDKII_PEI_STORAGE_SECURITY_CMD_PPI    *This,
+  IN  UINTN                                 DeviceIndex,
+  OUT UINTN                                 *DevicePathLength,
+  OUT EFI_DEVICE_PATH_PROTOCOL              **DevicePath
+  );
+
+/**
+  Send a security protocol command to a device that receives data and/or the 
result
+  of one or more commands sent by SendData.
+
+  The ReceiveData function sends a security protocol command to the given 
DeviceIndex.
+  The security protocol command sent is defined by SecurityProtocolId and 
contains
+  the security protocol specific data SecurityProtocolSpecificData. The 
function
+  returns the data from the security protocol command in PayloadBuffer.
+
+  For devices supporting the SCSI command set, the security protocol command 
is sent
+  using the SECURITY PROTOCOL IN command defined in SPC-4.
+
+  For devices supporting the ATA command set, the security protocol command is 
sent
+  using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if 
PayloadBufferSize
+  is non-zero.
+
+  If the PayloadBufferSize is zero, the security protocol command is sent 
using the
+  Trusted Non-Data command defined in ATA8-ACS.
+
+  If PayloadBufferSize is too small to store the available data from the 
security
+  protocol command, the function shall copy PayloadBufferSize bytes into the
+  PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
+
+  If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is 
non-zero,
+  the function shall return EFI_INVALID_PARAMETER.
+
+  If the given DeviceIndex does not support security protocol commands, the 
function
+  shall return EFI_UNSUPPORTED.
+
+  If the security protocol fails to complete within the Timeout period, the 
function
+  shall return EFI_TIMEOUT.
+
+  If the security protocol command completes without an error, the function 
shall
+  return EFI_SUCCESS. If the security protocol command completes with an 
error, the
+  function shall return EFI_DEVICE_ERROR.
+
+  @param[in]  This             The PPI instance pointer.
+  @param[in]  DeviceIndex      Specifies the storage security device to which 
the
+                               function wants to talk. Because the driver that
+                               implements Storage Security Command PPIs will 
manage
+                               multiple storage devices, the PPIs that want to 
talk
+                               to a single device must specify the device index
+                               that was assigned during the enumeration 
process.
+                               This index is a number from one to 
NumberofDevices.
+  @param[in]  Timeout          The timeout, in 100ns units, to use for the 
execution
+                               of the security protocol command. A Timeout 
value
+                               of 0 means that this function will wait 
indefinitely
+                               for the security protocol command to execute. If
+                               Timeout is greater than zero, then this function
+                               will return EFI_TIMEOUT if the time required to
+                               execute the receive data command is greater than
+                               Timeout.
+  @param[in]  SecurityProtocolId
+                               The value of the "Security Protocol" parameter 
of
+                               the security protocol command to be sent.
+  @param[in]  SecurityProtocolSpecificData
+                               The value of the "Security Protocol Specific"
+                               parameter of the security protocol command to be
+                               sent.
+  @param[in]  PayloadBufferSize
+                               Size in bytes of the payload data buffer.
+  @param[out] PayloadBuffer    A pointer to a destination buffer to store the
+                               security protocol command specific payload data
+                               for the security protocol command. The caller is
+                               responsible for having either implicit or 
explicit
+                               ownership of the buffer.
+  @param[out] PayloadTransferSize
+                               A pointer to a buffer to store the size in bytes
+                               of the data written to the payload data buffer.
+
+  @retval EFI_SUCCESS                  The security protocol command completed
+                                       successfully.
+  @retval EFI_WARN_BUFFER_TOO_SMALL    The PayloadBufferSize was too small to
+                                       store the available data from the 
device.
+                                       The PayloadBuffer contains the truncated
+                                       data.
+  @retval EFI_UNSUPPORTED              The given DeviceIndex does not support
+                                       security protocol commands.
+  @retval EFI_DEVICE_ERROR             The security protocol command completed
+                                       with an error.
+  @retval EFI_INVALID_PARAMETER        The PayloadBuffer or PayloadTransferSize
+                                       is NULL and PayloadBufferSize is 
non-zero.
+  @retval EFI_TIMEOUT                  A timeout occurred while waiting for the
+                                       security protocol command to execute.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_STORAGE_SECURITY_RECEIVE_DATA) (
+  IN  EDKII_PEI_STORAGE_SECURITY_CMD_PPI    *This,
+  IN  UINTN                                 DeviceIndex,
+  IN  UINT64                                Timeout,
+  IN  UINT8                                 SecurityProtocolId,
+  IN  UINT16                                SecurityProtocolSpecificData,
+  IN  UINTN                                 PayloadBufferSize,
+  OUT VOID                                  *PayloadBuffer,
+  OUT UINTN                                 *PayloadTransferSize
+  );
+
+/**
+  Send a security protocol command to a device.
+
+  The SendData function sends a security protocol command containing the 
payload
+  PayloadBuffer to the given DeviceIndex. The security protocol command sent is
+  defined by SecurityProtocolId and contains the security protocol specific 
data
+  SecurityProtocolSpecificData. If the underlying protocol command requires a
+  specific padding for the command payload, the SendData function shall add 
padding
+  bytes to the command payload to satisfy the padding requirements.
+
+  For devices supporting the SCSI command set, the security protocol command is
+  sent using the SECURITY PROTOCOL OUT command defined in SPC-4.
+
+  For devices supporting the ATA command set, the security protocol command is
+  sent using one of the TRUSTED SEND commands defined in ATA8-ACS if 
PayloadBufferSize
+  is non-zero. If the PayloadBufferSize is zero, the security protocol command
+  is sent using the Trusted Non-Data command defined in ATA8-ACS.
+
+  If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function 
shall
+  return EFI_INVALID_PARAMETER.
+
+  If the given DeviceIndex does not support security protocol commands, the 
function
+  shall return EFI_UNSUPPORTED.
+
+  If the security protocol fails to complete within the Timeout period, the 
function
+  shall return EFI_TIMEOUT.
+
+  If the security protocol command completes without an error, the function 
shall
+  return EFI_SUCCESS. If the security protocol command completes with an error,
+  the functio shall return EFI_DEVICE_ERROR.
+
+  @param[in] This              The PPI instance pointer.
+  @param[in] DeviceIndex       The ID of the device.
+  @param[in] Timeout           The timeout, in 100ns units, to use for the 
execution
+                               of the security protocol command. A Timeout 
value
+                               of 0 means that this function will wait 
indefinitely
+                               for the security protocol command to execute. If
+                               Timeout is greater than zero, then this function
+                               will return EFI_TIMEOUT if the time required to
+                               execute the receive data command is greater than
+                               Timeout.
+  @param[in] SecurityProtocolId
+                               The value of the "Security Protocol" parameter 
of
+                               the security protocol command to be sent.
+  @param[in] SecurityProtocolSpecificData
+                               The value of the "Security Protocol Specific"
+                               parameter of the security protocol command to be
+                               sent.
+  @param[in] PayloadBufferSize Size in bytes of the payload data buffer.
+  @param[in] PayloadBuffer     A pointer to a destination buffer to store the
+                               security protocol command specific payload data
+                               for the security protocol command.
+
+  @retval EFI_SUCCESS              The security protocol command completed 
successfully.
+  @retval EFI_UNSUPPORTED          The given DeviceIndex does not support 
security
+                                   protocol commands.
+  @retval EFI_DEVICE_ERROR         The security protocol command completed with
+                                   an error.
+  @retval EFI_INVALID_PARAMETER    The PayloadBuffer is NULL and 
PayloadBufferSize
+                                   is non-zero.
+  @retval EFI_TIMEOUT              A timeout occurred while waiting for the 
security
+                                   protocol command to execute.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_STORAGE_SECURITY_SEND_DATA) (
+  IN EDKII_PEI_STORAGE_SECURITY_CMD_PPI    *This,
+  IN UINTN                                 DeviceIndex,
+  IN UINT64                                Timeout,
+  IN UINT8                                 SecurityProtocolId,
+  IN UINT16                                SecurityProtocolSpecificData,
+  IN UINTN                                 PayloadBufferSize,
+  IN VOID                                  *PayloadBuffer
+  );
+
+//
+// EDKII_PEI_STORAGE_SECURITY_CMD_PPI contains a set of services to send 
security
+// protocol commands to a mass storage device. Two types of security protocol
+// commands are supported. SendData sends a command with data to a device.
+// ReceiveData sends a command that receives data and/or the result of one or
+// more commands sent by SendData.
+//
+struct _EDKII_PEI_STORAGE_SECURITY_CMD_PPI {
+  UINT64                                           Revision;
+  EDKII_PEI_STORAGE_SECURITY_GET_NUMBER_DEVICES    GetNumberofDevices;
+  EDKII_PEI_STORAGE_SECURITY_GET_DEVICE_PATH       GetDevicePath;
+  EDKII_PEI_STORAGE_SECURITY_RECEIVE_DATA          ReceiveData;
+  EDKII_PEI_STORAGE_SECURITY_SEND_DATA             SendData;
+};
+
+extern EFI_GUID gEdkiiPeiStorageSecurityCommandPpiGuid;
+
+#endif
-- 
2.12.0.windows.1

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Reply via email to