[edk2] [PATCH] MdeModulePkg/PciBus: Fix a bug PPB MEM32 BAR isn't restored sometimes

[Ray Ni]

From: Ruiyu Ni <ruiyu...@intel.com>

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1505

When a device under PPB contains option ROM but doesn't require 32bit
MMIO, ProgrameUpstreamBridgeForRom() cannot correctly restore the
PPB MEM32 RANGE BAR. It causes the 32bit MMIO conflict which may
cause system hangs in boot.

The root cause is when ProgrameUpstreamBridgeForRom() calls
ProgramPpbApperture() to restore the PPB MEM32 RANGE BAR, the
ProgramPpbApperture() skips to program the BAR when the resource
length is 0.

This patch fixes this issue by not calling ProgramPpbApperture().
Instead, it directly programs the PPB MEM32 RANGE BAR.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray...@intel.com>
Cc: Hao Wu <hao.a...@intel.com>
Cc: Dandan Bi <dandan...@intel.com>
---
 .../Bus/Pci/PciBusDxe/PciResourceSupport.c    | 53 +++++++++----------
 1 file changed, 24 insertions(+), 29 deletions(-)

diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c 
b/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c
index d3cbefbadf..77cdc3e844 100644
--- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c
+++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c
@@ -1,7 +1,7 @@
 /** @file
   PCI resouces support functions implemntation for PCI Bus module.
 
-Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
 This program and the accompanying materials
 are licensed and made available under the terms and conditions of the BSD 
License
 which accompanies this distribution.  The full text of the license may be 
found at
@@ -1661,57 +1661,52 @@ ProgrameUpstreamBridgeForRom (
   IN BOOLEAN         Enable
   )
 {
-  PCI_IO_DEVICE     *Parent;
-  PCI_RESOURCE_NODE Node;
-  UINT64            Base;
-  UINT64            Length;
+  PCI_IO_DEVICE       *Parent;
+  EFI_PCI_IO_PROTOCOL *PciIo;
+  UINT16              Base;
+  UINT16              Limit;
   //
   // For root bridge, just return.
   //
   Parent = PciDevice->Parent;
-  ZeroMem (&Node, sizeof (Node));
   while (Parent != NULL) {
     if (!IS_PCI_BRIDGE (&Parent->Pci)) {
       break;
     }
 
-    Node.PciDev     = Parent;
-    Node.Alignment  = 0;
-    Node.Bar        = PPB_MEM32_RANGE;
-    Node.ResType    = PciBarTypeMem32;
-    Node.Offset     = 0;
+    PciIo = &Parent->PciIo;
 
     //
     // Program PPB to only open a single <= 16MB apperture
     //
     if (Enable) {
-      //
-      // Save the original PPB_MEM32_RANGE BAR.
-      // The values will be changed by ProgramPpbApperture().
-      //
-      Base   = Parent->PciBar[Node.Bar].BaseAddress;
-      Length = Parent->PciBar[Node.Bar].Length;
-
       //
       // Only cover MMIO for Option ROM.
       //
-      Node.Length     = PciDevice->RomSize;
-      ProgramPpbApperture (OptionRomBase, &Node);
-
-      //
-      // Restore the original PPB_MEM32_RANGE BAR.
-      // So the MEM32 RANGE BAR register can be restored when disable the 
decoding.
-      //
-      Parent->PciBar[Node.Bar].BaseAddress = Base;
-      Parent->PciBar[Node.Bar].Length      = Length;
+      Base  = (UINT16) (OptionRomBase >> 16);
+      Limit = (UINT16) ((OptionRomBase + PciDevice->RomSize - 1) >> 16);
+      PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, OFFSET_OF (PCI_TYPE01, 
Bridge.MemoryBase),  1, &Base);
+      PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, OFFSET_OF (PCI_TYPE01, 
Bridge.MemoryLimit), 1, &Limit);
 
       PCI_ENABLE_COMMAND_REGISTER (Parent, EFI_PCI_COMMAND_MEMORY_SPACE);
     } else {
       //
       // Cover 32bit MMIO for devices below the bridge.
       //
-      Node.Length     = Parent->PciBar[Node.Bar].Length;
-      ProgramPpbApperture (Parent->PciBar[Node.Bar].BaseAddress, &Node);
+      if (Parent->PciBar[PPB_MEM32_RANGE].Length == 0) {
+        //
+        // When devices under the bridge contains Option ROM and doesn't 
require 32bit MMIO.
+        //
+        Base  = (UINT16) gAllOne;
+        Limit = (UINT16) gAllZero;
+      } else {
+        Base  = (UINT16) (Parent->PciBar[PPB_MEM32_RANGE].BaseAddress >> 16);
+        Limit = (UINT16)
+                    ((Parent->PciBar[PPB_MEM32_RANGE].BaseAddress + 
Parent->PciBar[PPB_MEM32_RANGE].Length - 1) >> 16);
+      }
+      PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, OFFSET_OF (PCI_TYPE01, 
Bridge.MemoryBase),  1, &Base);
+      PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, OFFSET_OF (PCI_TYPE01, 
Bridge.MemoryLimit), 1, &Limit);
+
       PCI_DISABLE_COMMAND_REGISTER (Parent, EFI_PCI_COMMAND_MEMORY_SPACE);
     }
 
-- 
2.20.1.windows.1

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel