On 2/6/19 4:48 PM, Antoine Coeur wrote: > Fix various typos in ArmVirtPkg. > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Coeur <co...@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <phi...@redhat.com> > --- > ArmVirtPkg/ArmVirt.dsc.inc | 2 +- > ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c | 2 +- > ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c | 4 ++-- > .../FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c | 6 +++--- > .../Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c | 6 +++--- > ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c | 4 ++-- > 6 files changed, 12 insertions(+), 12 deletions(-) > > diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc > index c47955be94..304a4b4d21 100644 > --- a/ArmVirtPkg/ArmVirt.dsc.inc > +++ b/ArmVirtPkg/ArmVirt.dsc.inc > @@ -333,7 +333,7 @@ > # Values are in EFI Pages (4K). DXE Core will make sure that > # at least this much of each type of memory can be allocated > # from a single memory range. This way you only end up with > - # maximum of two fragements for each type in the memory map > + # maximum of two fragments for each type in the memory map > # (the memory used, and the free memory that was prereserved > # but not used). > # > diff --git a/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c > b/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c > index 73a0fbd8a4..758bc91ab1 100644 > --- a/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c > +++ b/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c > @@ -1,5 +1,5 @@ > /** @file > - HOB Library implemenation for Dxe Phase with DebugLib dependency removed > + HOB Library implementation for Dxe Phase with DebugLib dependency removed > > Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR> > Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR> > diff --git a/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c > b/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c > index 6479f53b37..a083826bab 100644 > --- a/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c > +++ b/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c > @@ -1238,7 +1238,7 @@ PciExpressBitFieldAndThenOr32 ( > Size into the buffer specified by Buffer. This function only allows the PCI > configuration registers from a single PCI function to be read. Size is > returned. When possible 32-bit PCI configuration read cycles are used to > read > - from StartAdress to StartAddress + Size. Due to alignment restrictions, > 8-bit > + from StartAddress to StartAddress + Size. Due to alignment restrictions, > 8-bit > and 16-bit PCI configuration read cycles may be used at the beginning and > the > end of the range. > > @@ -1338,7 +1338,7 @@ PciExpressReadBuffer ( > Size from the buffer specified by Buffer. This function only allows the PCI > configuration registers from a single PCI function to be written. Size is > returned. When possible 32-bit PCI configuration write cycles are used to > - write from StartAdress to StartAddress + Size. Due to alignment > restrictions, > + write from StartAddress to StartAddress + Size. Due to alignment > restrictions, > 8-bit and 16-bit PCI configuration write cycles may be used at the > beginning > and the end of the range. > > diff --git > a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c > b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c > index f0924dacbc..16c0e61816 100644 > --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c > +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c > @@ -234,13 +234,13 @@ SerialPortGetControl ( > } > > /** > - Sets the baud rate, receive FIFO depth, transmit/receice time out, parity, > + Sets the baud rate, receive FIFO depth, transmit/receive time out, parity, > data bits, and stop bits on a serial device. > > @param BaudRate The requested baud rate. A BaudRate value of 0 > will use the > device's default interface speed. > On output, the value actually set. > - @param ReveiveFifoDepth The requested depth of the FIFO on the receive > side of the > + @param ReceiveFifoDepth The requested depth of the FIFO on the receive > side of the > serial interface. A ReceiveFifoDepth value of 0 > will use > the device's default FIFO depth. > On output, the value actually set. > @@ -253,7 +253,7 @@ SerialPortGetControl ( > DefaultParity will use the device's default > parity value. > On output, the value actually set. > @param DataBits The number of data bits to use on the serial > device. A DataBits > - vaule of 0 will use the device's default data > bit setting. > + value of 0 will use the device's default data > bit setting. > On output, the value actually set. > @param StopBits The number of stop bits to use on this serial > device. A StopBits > value of DefaultStopBits will use the device's > default number of > diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c > b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c > index 8b736fd11f..2f10fb7b91 100644 > --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c > +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c > @@ -156,13 +156,13 @@ SerialPortPoll ( > } > > /** > - Sets the baud rate, receive FIFO depth, transmit/receice time out, parity, > + Sets the baud rate, receive FIFO depth, transmit/receive time out, parity, > data bits, and stop bits on a serial device. > > @param BaudRate The requested baud rate. A BaudRate value of 0 > will use the > device's default interface speed. > On output, the value actually set. > - @param ReveiveFifoDepth The requested depth of the FIFO on the receive > side of the > + @param ReceiveFifoDepth The requested depth of the FIFO on the receive > side of the > serial interface. A ReceiveFifoDepth value of 0 > will use > the device's default FIFO depth. > On output, the value actually set. > @@ -175,7 +175,7 @@ SerialPortPoll ( > DefaultParity will use the device's default > parity value. > On output, the value actually set. > @param DataBits The number of data bits to use on the serial > device. A DataBits > - vaule of 0 will use the device's default data > bit setting. > + value of 0 will use the device's default data > bit setting. > On output, the value actually set. > @param StopBits The number of stop bits to use on this serial > device. A StopBits > value of DefaultStopBits will use the device's > default number of > diff --git a/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c > b/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c > index bb07f5e22b..534357eff4 100644 > --- a/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c > +++ b/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c > @@ -779,11 +779,11 @@ PlatformBootManagerBeforeConsole ( > Do the platform specific action after the console is ready > Possible things that can be done in PlatformBootManagerAfterConsole: > > Console post action: > - > Dynamically switch output mode from 100x31 to 80x25 for certain > senarino > + > Dynamically switch output mode from 100x31 to 80x25 for certain > scenario > > Signal console ready platform customized event > > Run diagnostics like memory testing > > Connect certain devices > - > Dispatch aditional option roms > + > Dispatch additional option roms > > Special boot: e.g.: USB boot, enter UI > **/ > VOID > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel