I agree to use debug message. No need to interrupt boot process. Thanks, Ting
-----Original Message----- From: Wu, Jiaxin Sent: Tuesday, February 12, 2019 8:48 AM To: Fu, Siyuan <siyuan...@intel.com> Cc: edk2-devel@lists.01.org; Mike Turner <michael.tur...@microsoft.com>; Ye, Ting <ting...@intel.com> Subject: RE: [PATCH v1] NetworkPkg/Ip6Dxe: Clean the invalid IPv6 configuration during driver start. Looks it's enough to add the warning debug message. I have sent the version 2 patch to do that. Thanks, Jiaxin > -----Original Message----- > From: Fu, Siyuan > Sent: Tuesday, February 12, 2019 8:28 AM > To: Wu, Jiaxin <jiaxin...@intel.com> > Cc: edk2-devel@lists.01.org; Mike Turner > <michael.tur...@microsoft.com>; Ye, Ting <ting...@intel.com> > Subject: RE: [PATCH v1] NetworkPkg/Ip6Dxe: Clean the invalid IPv6 > configuration during driver start. > > Yes, Jiaxin. You should not use popup messages unless you 100 percent > sure the code is running in setup browser. > > BestRegards > Fu Siyuan > > > > -----Original Message----- > > From: Mike Turner [mailto:michael.tur...@microsoft.com] > > Sent: Monday, February 11, 2019 11:10 PM > > To: Wu, Jiaxin <jiaxin...@intel.com>; Ye, Ting <ting...@intel.com>; > > edk2- de...@lists.01.org > > Cc: Fu, Siyuan <siyuan...@intel.com> > > Subject: RE: [PATCH v1] NetworkPkg/Ip6Dxe: Clean the invalid IPv6 > > configuration during driver start. > > > > I haven't seen any patch for a popup, but message popups during > > driver > binding > > start are not a good thing. > > > > Michael R Turner > > Surface UEFI Development > > Microsoft Corporation > > One Redmond Way > > Redmond WA 98052 > > > > 425-705-0928 > > > > This email message may contain confidential and privileged > information. Any > > unauthorized use is prohibited. If you are not the intended > > recipient, > please > > contact the sender by reply email and destroy all copies of the > > original message. > > > > > > -----Original Message----- > > From: Wu, Jiaxin <jiaxin...@intel.com> > > Sent: Sunday, February 10, 2019 7:10 PM > > To: Ye, Ting <ting...@intel.com>; edk2-devel@lists.01.org > > Cc: Mike Turner <michael.tur...@microsoft.com>; Fu, Siyuan > > <siyuan...@intel.com> > > Subject: RE: [PATCH v1] NetworkPkg/Ip6Dxe: Clean the invalid IPv6 > > configuration during driver start. > > > > Agree, thanks the comment. I will update the patch. > > > > > > > > > -----Original Message----- > > > From: Ye, Ting > > > Sent: Monday, February 11, 2019 11:09 AM > > > To: Wu, Jiaxin <jiaxin...@intel.com>; edk2-devel@lists.01.org > > > Cc: Michael Turner <michael.tur...@microsoft.com>; Fu, Siyuan > > > <siyuan...@intel.com> > > > Subject: RE: [PATCH v1] NetworkPkg/Ip6Dxe: Clean the invalid IPv6 > > > configuration during driver start. > > > > > > Hi Jiaxin, > > > > > > I agree we need start IPv6 stack no matter the configuration is valid or > > > not. > > > However I would suggest to add more comments and pop up warning > > > messages to let user know we continue to start IPv6 stack without > > > using previously saved configuration. > > > > > > Thanks, > > > Ting > > > > > > -----Original Message----- > > > From: Wu, Jiaxin > > > Sent: Sunday, February 3, 2019 2:24 PM > > > To: edk2-devel@lists.01.org > > > Cc: Michael Turner <michael.tur...@microsoft.com>; Ye, Ting > > > <ting...@intel.com>; Fu, Siyuan <siyuan...@intel.com>; Wu, Jiaxin > > > <jiaxin...@intel.com> > > > Subject: [PATCH v1] NetworkPkg/Ip6Dxe: Clean the invalid IPv6 > > > configuration during driver start. > > > > > > REF: > > > > https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugz > > > > illa.tianocore.org%2Fshow_bug.cgi%3Fid%3D1448&data=02%7C01%7C > Micha > > > > el.Turner%40microsoft.com%7C93fb5d7f003b48c6561d08d68fce66f4%7C72f9 > 88b > > > > f86f141af91ab2d7cd011db47%7C1%7C0%7C636854514000398927&sdata > =bCAbT > > > njjX9bmuRiASoCkPiZtdqUY14BDMgyLd%2BYNNx4%3D&reserved=0 > > > > > > This patch is to clean the invalid data and continue to start IP6 driver. > > > > > > Cc: Michael Turner <michael.tur...@microsoft.com> > > > Cc: Ye Ting <ting...@intel.com> > > > Cc: Fu Siyuan <siyuan...@intel.com> > > > Contributed-under: TianoCore Contribution Agreement 1.1 > > > Signed-off-by: Wu Jiaxin <jiaxin...@intel.com> > > > Signed-off-by: Michael Turner <michael.tur...@microsoft.com> > > > --- > > > NetworkPkg/Ip6Dxe/Ip6Driver.c | 20 ++++++++++++++++++-- > > > 1 file changed, 18 insertions(+), 2 deletions(-) > > > > > > diff --git a/NetworkPkg/Ip6Dxe/Ip6Driver.c > > > b/NetworkPkg/Ip6Dxe/Ip6Driver.c index 4c607125a6..1bd1c61da8 > > > 100644 > > > --- a/NetworkPkg/Ip6Dxe/Ip6Driver.c > > > +++ b/NetworkPkg/Ip6Dxe/Ip6Driver.c > > > @@ -586,11 +586,19 @@ Ip6DriverBindingStart ( > > > Ip6ConfigDataTypeManualAddress, > > > DataItem->DataSize, > > > DataItem->Data.Ptr > > > ); > > > if (EFI_ERROR(Status) && Status != EFI_NOT_READY) { > > > - goto UNINSTALL_PROTOCOL; > > > + // > > > + // Clean the invalid ManualAddress configuration. > > > + // > > > + Status = Ip6Cfg->SetData ( > > > + Ip6Cfg, > > > + Ip6ConfigDataTypeManualAddress, > > > + 0, > > > + NULL > > > + ); > > > } > > > } > > > > > > // > > > // If there is any default gateway address, set it. > > > @@ -602,11 +610,19 @@ Ip6DriverBindingStart ( > > > Ip6ConfigDataTypeGateway, > > > DataItem->DataSize, > > > DataItem->Data.Ptr > > > ); > > > if (EFI_ERROR(Status)) { > > > - goto UNINSTALL_PROTOCOL; > > > + // > > > + // Clean the invalid Gateway configuration. > > > + // > > > + Status = Ip6Cfg->SetData ( > > > + Ip6Cfg, > > > + Ip6ConfigDataTypeGateway, > > > + 0, > > > + NULL > > > + ); > > > } > > > } > > > > > > // > > > // ready to go: start the receiving and timer > > > -- > > > 2.17.1.windows.2 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
