Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian <feng.t...@intel.com> Reviewed-by: Star Zeng <star.z...@intel.com> --- MdePkg/Include/Protocol/SmartCardReader.h | 326 ++++++++++++++++++++++++++++++ MdePkg/MdePkg.dec | 3 + 2 files changed, 329 insertions(+) create mode 100644 MdePkg/Include/Protocol/SmartCardReader.h
diff --git a/MdePkg/Include/Protocol/SmartCardReader.h b/MdePkg/Include/Protocol/SmartCardReader.h new file mode 100644 index 0000000..b093774 --- /dev/null +++ b/MdePkg/Include/Protocol/SmartCardReader.h @@ -0,0 +1,326 @@ +/** @file + The UEFI Smart Card Reader Protocol provides an abstraction for device to provide + smart card reader support. This protocol is very close to Part 5 of PC/SC workgroup + specifications and provides an API to applications willing to communicate with a + smart card or a smart card reader. + + Copyright (c) 2015, Intel Corporation. All rights reserved.<BR> + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __SMART_CARD_READER_H__ +#define __SMART_CARD_READER_H__ + +#define EFI_SMART_CARD_READER_PROTOCOL_GUID \ + { \ + 0x2a4d1adf, 0x21dc, 0x4b81, {0xa4, 0x2f, 0x8b, 0x8e, 0xe2, 0x38, 0x00, 0x60} \ + } + +typedef struct _EFI_SMART_CARD_READER_PROTOCOL EFI_SMART_CARD_READER_PROTOCOL; + +// +// Codes for access mode +// +#define SCARD_AM_READER 0x0001 // Exclusive access to reader +#define SCARD_AM_CARD 0x0002 // Exclusive access to card +// +// Codes for card action +// +#define SCARD_CA_NORESET 0x0000 // Don't reset card +#define SCARD_CA_COLDRESET 0x0001 // Perform a cold reset +#define SCARD_CA_WARMRESET 0x0002 // Perform a warm reset +#define SCARD_CA_UNPOWER 0x0003 // Power off the card +#define SCARD_CA_EJECT 0x0004 // Eject the card +// +// Protocol types +// +#define SCARD_PROTOCOL_UNDEFINED 0x0000 +#define SCARD_PROTOCOL_T0 0x0001 +#define SCARD_PROTOCOL_T1 0x0002 +#define SCARD_PROTOCOL_RAW 0x0004 +// +// Codes for state type +// +#define SCARD_UNKNOWN 0x0000 /* state is unknown */ +#define SCARD_ABSENT 0x0001 /* Card is absent */ +#define SCARD_INACTIVE 0x0002 /* Card is present and not powered*/ +#define SCARD_ACTIVE 0x0003 /* Card is present and powered */ +// +// Macro to generate a ControlCode & PC/SC part 10 control code +// +#define SCARD_CTL_CODE(code) (0x42000000 + (code)) +#define CM_IOCTL_GET_FEATURE_REQUEST SCARD_CTL_CODE(3400) + +/** + This function requests connection to the smart card or the reader, using the + appropriate reset type and protocol. + + The SCardConnectfunction requests access to the smart card or the reader. Upon + success, it is then possible to call SCardTransmit. + + If AccessMode is set to SCARD_AM_READER, PreferredProtocols must be set to + SCARD_PROTOCOL_UNDEFINED and CardAction to SCARD_CA_NORESET else function + fails with EFI_INVALID_PARAMETER. + + @param[in] This Indicates a pointer to the calling context. + @param[in] AccessMode Codes of access mode. + @param[in] CardAction SCARD_CA_NORESET, SCARD_CA_COLDRESET or + SCARD_CA_WARMRESET. + @param[in] PreferredProtocols Bitmask of acceptable protocols. + @param[out] ActiveProtocol A flag that indicates the active protocol. + + @retval EFI_SUCCESS The requested command completed successfully. + @retval EFI_INVALID_PARAMETER This is NULL + @retval EFI_INVALID_PARAMETER AccessMode is not valid. + @retval EFI_INVALID_PARAMETER CardAction is not valid. + @retval EFI_INVALID_PARAMETER Invalid combination of AccessMode/CardAction/ + PreferredProtocols. + @retval EFI_NOT_READY A smart card is inserted but failed to return an ATR. + @retval EFI_UNSUPPORTED PreferredProtocols does not contain an available + protocol to use. + @retval EFI_NO_MEDIA AccessMode is set to SCARD_AM_CARD but there is + no smart card inserted. + @retval EFI_ACCESS_DENIED Access is already locked by a previous SCardConnectcall. + @retval EFI_DEVICE_ERROR Any other error condition, typically a reader removal. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SMART_CARD_READER_CONNECT) ( + IN EFI_SMART_CARD_READER_PROTOCOL *This, + IN UINT32 AccessMode, + IN UINT32 CardAction, + IN UINT32 PreferredProtocols, + OUT UINT32 *ActiveProtocol + ); + +/** + This function releases a connection previously taken by SCardConnect. + + The SCardDisconnect function releases the lock previously taken by SCardConnect. + In case the smart card has been removed before this call, thisfunction + returns EFI_SUCCESS. If there is no previous call to SCardConnect, this + function returns EFI_SUCCESS. + + @param[in] This Indicates a pointer to the calling context. + @param[in] CardAction Codes for card action. + + @retval EFI_SUCCESS The requested command completed successfully. + @retval EFI_INVALID_PARAMETER This is NULL + @retval EFI_INVALID_PARAMETER CardAction value is unknown. + @retval EFI_UNSUPPORTED Reader does not support Eject card feature + (disconnect was not performed). + @retval EFI_DEVICE_ERROR Any other error condition, typically a reader removal. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SMART_CARD_READER_DISCONNECT) ( + IN EFI_SMART_CARD_READER_PROTOCOL *This, + IN UINT32 CardAction + ); + +/** + This function retrieves some basic information about the smart card and reader. + + The SCardStatusfunction retrieves basic reader and card information. + + If ReaderName, State, CardProtocolor Atris NULL, the function does not fail but + does not fill in such variables. + + If EFI_SUCCESS is not returned, ReaderName and Atr contents shall not be considered + as valid. + + @param[in] This Indicates a pointer to the calling context. + @param[out] ReaderName A pointer to a NULL terminated string that will + contain the reader name. + @param[in, out] ReaderNameLength On input, a pointer to the variablethat holds the + maximal size, in bytes,of ReaderName. + On output, the required size, in bytes, for ReaderName. + @param[out] State Current state of the smart card reader. + @param[out] CardProtocol Current protocol used to communicate with the smart card. + @param[out] Atr A pointer to retrieve the ATR of the smart card. + @param[in, out] AtrLength On input, a pointer to hold the maximum size, in bytes, + of Atr(usually 33). + On output, the required size, inbytes, for the smart + card ATR. + + @retval EFI_SUCCESS The requested command completed successfully. + @retval EFI_INVALID_PARAMETER This is NULL + @retval EFI_INVALID_PARAMETER ReaderName is not NULL but ReaderNameLength is NULL + @retval EFI_INVALID_PARAMETER Atr is not NULL but AtrLength is NULL + @retval EFI_BUFFER_TOO_SMALL ReaderNameLength is not big enough to hold the reader name. + ReaderNameLength has been updated to the required value. + @retval EFI_BUFFER_TOO_SMALL AtrLength is not big enough to hold the ATR. + AtrLength has been updated to the required value. + @retval EFI_DEVICE_ERROR Any other error condition, typically a reader removal. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SMART_CARD_READER_STATUS) ( + IN EFI_SMART_CARD_READER_PROTOCOL *This, + OUT CHAR16 *ReaderName OPTIONAL, + IN OUT UINTN *ReaderNameLength OPTIONAL, + OUT UINT32 *State OPTIONAL, + OUT UINT32 *CardProtocol OPTIONAL, + OUT UINT8 *Atr OPTIONAL, + IN OUT UINTN *AtrLength OPTIONAL + ); + +/** + This function sends a command to the card or reader and returns its response. + + The protocol to use to communicate with the smart card has been selected through + SCardConnectcall. + + In case RAPDULength indicates a buffer too small to holdthe response APDU, the + function fails with EFI_BUFFER_TOO_SMALL. + + @param[in] This A pointer to the EFI_USBFN_IO_PROTOCOLinstance. + @param[in] CAPDU A pointer to a byte array thatcontains the Command + APDU to send to the smart card or reader. + @param[in] CAPDULength Command APDU size, in bytes. + @param[out] RAPDU A pointer to a byte array that will contain the + Response APDU. + @param[in, out] RAPDULength On input, the maximum size, inbytes, of the Response + APDU. + On output, the size, in bytes, of the Response APDU. + + @retval EFI_SUCCESS The requested command completed successfully. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_INVALID_PARAMETER CAPDU is NULL or CAPDULength is 0. + @retval EFI_BUFFER_TOO_SMALL RAPDULength is not big enough to hold the response APDU. + RAPDULength has been updated to the required value. + @retval EFI_NO_MEDIA There is no card in the reader. + @retval EFI_NOT_READY Card is not powered. + @retval EFI_PROTOCOL_ERROR A protocol error has occurred. + @retval EFI_TIMEOUT The reader did not respond. + @retval EFI_ACCESS_DENIED A communication with the reader/card is already pending. + @retval EFI_DEVICE_ERROR Any other error condition, typically a reader removal. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SMART_CARD_READER_TRANSMIT) ( + IN EFI_SMART_CARD_READER_PROTOCOL *This, + IN UINT8 *CAPDU, + IN UINTN CAPDULength, + OUT UINT8 *RAPDU, + IN OUT UINTN *RAPDULength +); + ); + +/** + This function provides direct access to the reader. + + This function gives direct control to send commands to the driver or the reader. + The ControlCode to use is vendor dependant; the only standard code defined is + the one to get PC/SC part 10 features. + + InBuffer and Outbuffer may be NULL when ControlCode operation does not require + them. + + @param[in] This Indicates a pointer to the calling context. + @param[in] ControlCode The control code for the operation to perform. + @param[in] InBuffer A pointer to the input parameters. + @param[in] InBufferLength Size, in bytes, of input parameters. + @param[out] OutBuffer A pointer to the output parameters. + @param[in, out] OutBufferLength On input, maximal size, in bytes, to store output + parameters. + On output, the size, in bytes, of output parameters. + + @retval EFI_SUCCESS The requested command completed successfully. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_INVALID_PARAMETER ControlCode requires input parameters but: + InBuffer is NULL or InBufferLenth is NULL or + InBuffer is not NULL but InBufferLenth is less than + expected. + @retval EFI_INVALID_PARAMETER OutBuffer is not NULL but OutBufferLength is NULL. + @retval EFI_UNSUPPORTED ControlCode is not supported. + @retval EFI_BUFFER_TOO_SMALL OutBufferLength is not big enough to hold the output + parameters. + OutBufferLength has been updated to the required value. + @retval EFI_NO_MEDIA There is no card in the reader and the control code + specified requires one. + @retval EFI_NOT_READY ControlCode requires a powered card to operate. + @retval EFI_PROTOCOL_ERROR A protocol error has occurred. + @retval EFI_TIMEOUT The reader did not respond. + @retval EFI_ACCESS_DENIED A communication with the reader/card is already pending. + @retval EFI_DEVICE_ERROR Any other error condition, typically a reader removal. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SMART_CARD_READER_CONTROL) ( + IN EFI_SMART_CARD_READER_PROTOCOL *This, + IN UINT32 ControlCode, + IN UINT8 *InBuffer OPTIONAL, + IN UINTN InBufferLength OPTIONAL, + OUT UINT8 *OutBuffer OPTIONAL, + IN OUT UINTN *OutBufferLength OPTIONAL + ); + +/** + This function retrieves a reader or smart card attribute. + + Possibly supported attrib values are listed in "PC/SC specification, Part 3: + Requirements for PC-Connected Interface Devices". + + @param[in] This Indicates a pointer to the calling context. + @param[in] Attrib Identifier for the attribute to retrieve. + @param[out] OutBuffer A pointer to a buffer that will contain + attribute data. + @param[in, out] OutBufferLength On input, maximal size, in bytes, to store + attribute data. + On output, the size, in bytes, of attribute + data. + + @retval EFI_SUCCESS The requested command completed successfully. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_INVALID_PARAMETER OutBuffer is NULL or OutBufferLength is 0. + @retval EFI_BUFFER_TOO_SMALL OutBufferLength is not big enough to hold the output + parameters. + OutBufferLength has been updated to the required value. + @retval EFI_UNSUPPORTED Attribis not supported + @retval EFI_NO_MEDIA There is no card in the reader and Attrib value + requires one. + @retval EFI_NOT_READY Attrib requires a powered card to operate. + @retval EFI_PROTOCOL_ERROR A protocol error has occurred. + @retval EFI_TIMEOUT The reader did not respond. + @retval EFI_DEVICE_ERROR Any other error condition, typically a reader removal. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SMART_CARD_READER_GET_ATTRIB) ( + IN EFI_SMART_CARD_READER_PROTOCOL *This, + IN UINT32 Attrib, + OUT UINT8 *OutBuffer, + IN OUT UINTN *OutBufferLength + ); + +/// +/// Smart card aware application invokes this protocol to get access to an inserted +/// smart card in the reader or to the reader itself. +/// +struct _EFI_SMART_CARD_READER_PROTOCOL { + EFI_SMART_CARD_READER_CONNECT SCardConnect; + EFI_SMART_CARD_READER_DISCONNECT SCardDisconnect; + EFI_SMART_CARD_READER_STATUS SCardStatus; + EFI_SMART_CARD_READER_TRANSMIT SCardTransmit; + EFI_SMART_CARD_READER_CONTROL SCardControl; + EFI_SMART_CARD_READER_GET_ATTRIB SCardGetAttrib; +}; + +extern EFI_GUID gEfiSmartCardReaderProtocolGuid; + +#endif + diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec index 3e9b099..1216d67 100644 --- a/MdePkg/MdePkg.dec +++ b/MdePkg/MdePkg.dec @@ -1429,6 +1429,9 @@ ## Include/Protocol/BlockIoCrypto.h gEfiBlockIoCryptoProtocolGuid = { 0xa00490ba, 0x3f1a, 0x4b4c, { 0xab, 0x90, 0x4f, 0xa9, 0x97, 0x26, 0xa1, 0xe8 }} + ## Include/Protocol/SmartCardReader.h + gEfiSmartCardReaderProtocolGuid = { 0x2a4d1adf, 0x21dc, 0x4b81, {0xa4, 0x2f, 0x8b, 0x8e, 0xe2, 0x38, 0x00, 0x60 }} + # # [Error.gEfiMdePkgTokenSpaceGuid] # 0x80000001 | Invalid value provided. -- 1.9.5.msysgit.0 ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ edk2-devel mailing list edk2-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/edk2-devel
