Hi Endians Many Thanks for this distribution - looks awesome.
My Question resp. my problem is as follows: I have 3 ports (eg. 3 NICs) on my system; 2 are RED / WAN (DHCP each) eth1 and eth2 - idea is to have two 2 isps for redundancy - if one is down, the other one is still up... 1 is Green / LAN with all my clients in there. eth0 ***** Now, if i configure one Red (eth1 f.ex.), the green one eth0 and fire up, it works as a charme: dhcp acquisation on red eth1 is done, i can ping and trace to wherever i want. Now, as EFW 2.2-Rc1 allows me to have more than one red interface (outstanding!) i configure through Network?>Interfaces>Create an uplink another uplink with eth2. I then configure the type (Ether DHCP) say, that it is enabled, started on boot. I active "if this uplink fails activate "main..." the update. Same on eth1 vice versa (if uplink fails activate uplink1), update. Problem 1: The uplinkeditor then stalls (uplinkeditor.cgi is at 100% - top/shell) on 2 tested systems - all the same - only a hard kill helps, uplinkeditor stays unreachable ever after. Problem 2: the uplinks do not take over automatically when i f.ex. take off eth1 redethercable for testing. eth2 is connected, but i no longer can ping/trace/web. if i de- activate manually (through system/home) the main uplink on eth1 and vice versa, it works, but not automatically eg. if the main uplink fails (simulated through a disconnected cable), the uplink1 should automatically take over, eth2 is disonnected such way, and eth1 is connected it should work - but it doesn't here with me. Or, f.ex. both red are connected (both with a diffrent ip from dhcp) - if main is disconnected, i'm no longer able to ping, trace.... allthough uplink1 is connected. Etc.. I entered some routes for testing, but that won't change it. I have tested this on 2 diffrent systems (with diffrent standard harware) - 2 times the same. What am I doing wrong? Is there any howto? does this work somwhere? is this supposed to work in this release? I saw, that the paid devices allready are on 2.2 (final?) does this work there? Is there a fix release schedule for 2.2 community stable or any new rcs? Many thanks in advance for any replies or hints - anything concerning this toppic is appreciated. Best regards jump ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
