Hello It seems that NIC's can be renamed in the file /etc/businfotab and changes to this file are persistent even when configuration changes in the efw-gui are made.
here an example of a manually changed /etc/businfotab file : # Generated by ethconfig eth0 02:04.0 eth1 04:03.0 eth2 03:07.0 eth3 03:07.1 and here the original version : # Generated by ethconfig eth0 02:04.0 eth1 03:07.0 eth2 03:07.1 eth3 04:03.0 With best regards, André Andre Mueller schrieb: > EFW Version : 2.2rc1 Community > > Hello > > I have a computer with 4 NIC in total, two on-board and two on a > pci-board. Unfortunately the NICs are reported by EFW not ordered by the > NIC's MAC-address but randomly which is not a good idea. > > So I would like to rename the NICs how they are assigned to eth0 - eth3. > For this purpose I have reconfigured the file > /etc/udev/rules.d/70-persistent-net.rules but it seems that the > configuration is not considered by EFW at boot time. > > Any idea how and where the NIC can be renamed? > > Thanks in advance and with best regards, > > André > > > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Efw-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
