EFW Version : 2.2rc1 Community
Hello
on the LAN side of my firewall with EWF I have a GBit NIC connected to a
GBit Switch. Although LED's on the NIC as well on the switch are
indicating GBit link-connection/speed as well a query with ethtool
indicates the same :
ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: umbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
But in the efw-gui Network:NIC Status negotiated speed shows as
100baseTx-FD:
eth0: negotiated 100baseTx-FD flow-control, link ok
product info: vendor 00:aa:00, model 56 rev 0
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
flow-control
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
flow-control
Any ideas why this the case - a bug?
Many thanks in advances and with best regards,
André
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user
