Hardware is a Nokia IP330 firewall with 3 interfaces. Everything is
default on it except the ram which is at 256 atleast
I only have a serial connection to the device and can not use a monitor.
I have already gone through the device and amended the grub for
console=tty0S,38400 access. The problem that I am having is that the
device will not mount. Included in this is the start up procedure. Can
someone please help me out? I would really like to try this firewall
out.
Press any key to continue.
GNU GRUB version 0.95 (640K lower / 261120K upper memory)
+-------------------------------------------------------------------------+
| Endian Firewall (2.6.9-55.EL.endian19)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+-------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, 'a' to modify the kernel arguments
before booting, or 'c' for a command-line.
[ Minimal BASH-like line editing is supported. For the first word,
TAB
lists possible command completions. Anywhere else TAB lists the
possible
completions of a device/filename. ESC at any time cancels. ENTER
at any time accepts your changes.]
grub append> root=/dev/hdc3 panic=10 ro console=ttyS0,38400
Booting command-list
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-2.6.9-55.EL.endian19 root=/dev/hdc3 panic=10 ro
console=ttyS0,3
8400
[Linux-bzImage, setup=0x1e00, size=0x13d6b8]
initrd /initrd-2.6.9-55.EL.endian19.img
[Linux-initrd @ 0xff77000, 0x78c51 bytes]
savedefault
Linux version 2.6.9-55.EL.endian19 ([EMAIL PROTECTED]) (gcc
version 3.4.6 20060404 (Endian 3.4.6-8.endian6)) #1 Mon May 28 08:20:22
EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
256MB LOWMEM available.
Using x86 segment limits to approximate NX protection
zapping low mappings.
DMI 2.0 present.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
Built 1 zonelists
Kernel command line: root=/dev/hdc3 panic=10 ro console=ttyS0,38400
No local APIC present or hardware disabled
Initializing CPU#0
CPU 0 irqstacks, hard=c0382000 soft=c0381000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 398.649 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 255752k/262144k available (1701k kernel code, 5760k reserved,
663k data, 160k init, 0k highmem)
Calibrating delay using timer specific routine.. 797.99 BogoMIPS
(lpj=398998)
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 483k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfaa50, last bus=0
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fb5f0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb618, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
pnp: 00:0e: ioport range 0x203-0x20a has been reserved
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1225893924.217:1): initialized
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 8569520B903D1DF3
- User ID: Endian (Kernel Module GPG key)
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing
enabled
ÿttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using cfq io scheduler
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DTLA-305020, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 40188960 sectors (20576 MB) w/380KiB Cache, CHS=39870/16/63,
UDMA(33)
hda: hda1 hda2 hda3 hda4
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <[EMAIL PROTECTED]>
All bugs added by David S. Miller <[EMAIL PROTECTED]>
Freeing unused kernel memory: 160k freed
Red Hat nash version 4.2.1.8 starting
Mounted /proc filesystem
Mounting sysfs
Creating /dev
Starting udev
Creating root deKernel panic - not syncing: Attempted to kill init!
vice
Mounting r oot filesystem
<0>Rebooting in 10 seconds..mount: error 6 mounting ext3
mount: error 2 mounting none
Switching to new root
switchroot: mount failed: 22
umount /initrd/dev failed: 2
xøxÿxþ
The device will reboot each time and will give me the same error each
time. I had installed the software on an external PC with the monitor.
It was able to reboot and go through all of the setup on the external
pc. I was even prompted for a username and password. At that point I
shut the external PC down and moved the hard drive to the Nokia IP330.
Any help would be appreciated.
Rick
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user
