You have two different subnets on each end? What traffic should be going other the VPN? Can you ping ip addresses on each end?
-----Original Message----- From: Simon [mailto:grem...@gmail.com] Sent: Wednesday, January 21, 2009 6:47 PM To: efw-user@lists.sourceforge.net Subject: [Efw-user] Endian FW VPN to Fortigate 100A Hi There, We have a Endian 2.2rc3 running on our VDSL connection here in our office. We are using Endain for ppp. We also have a Fortigate 100A firewall at our remote datacentre.. i have been trying to setup a VPN from our office to our data centre and have got to the point where both firewalls report the VPN as up and active... but there is no traffic going over the VPN. My question is, is there any thing else on the Endian end that you need to enable? Like a routing rule or something like that? Thanks Simon ------------------------------------------------------------ ------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user