Your 10.0.0.0 devices can't talk to an Endian interface on 192.168.0.0
You would have to have your Endian interface assigned unique IP's on both 192.168.0 and 10.0.0 networks In addition, this Endian note may help as well. http://kb.endian.com/entry/37/ Lee Ermanno wrote:
Hi, i have a question about routing configuration of endian fw 2.2rc3. I have to link two different subnets, say 10.0.0.0/24 and 192.168.0.0/24, in the same lan with routing done by endian fw. My Endian installation is on a virtual machine, and i have two bridged networking used by endian, one on my green lan and one on my red (towards the router). The red is a different subnet and that's ok and my green is on 192.168.0.0/24; if i connect another bridged netowrking i can use a blue/orange zone on 10.0.0.0/24 but how can i use the endian routing section to configure this behaviour? I've tried this by configuring the routing section like source: 192.168.0.0/24 (my green) destination: 10.0.0.0/24 (my alternative subnet) static gateway: 192.168.0.253 (my endian) it is correct? any suggestion? Thank you in advance Ermanno ------------------------------------------------------------------------------ _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
-- Lee Marzke, [email protected] http://marzke.net/lee/ IT Consultant, VMware, VCenter, SAN storage, infrastructure, SW CM +1 800-393-5217 office +1 484-348-2230 fax +1 610-564-4932 cell sip://[email protected] VOIP
begin:vcard fn:Lee Marzke n:Marzke;Lee org:;VMware, SAN, infrastructure, SW CM adr:;;;Collegeville,;PA;19426;USA email;internet:[email protected] title:IT Consultant tel;work:+1 800 393 5217 tel;fax:+1 484 348 2230 tel;cell:+1 610 564 4932 url:http://4aero.com version:2.1 end:vcard
------------------------------------------------------------------------------
_______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
