Hi,
on my endian at home i just installed a 2.6.18 centos 5 kernel.
Then i could load all the kernel modules i need and i have full sources to
compile new modules.
Just do a forced installation with rpm -ivh --nodeps --force
kernel-devel-2.6.18-194.8.1.el5.i686.rpm
Works fine for me, only the dashboard says i should reboot as it doesn´t
recognize the 2.4 kernel.
But how cares...
Mit freundlichen Grüßen / Best regards
Michael Krebs
-------------------------------------------------
Carl Zeiss SMT AG
Geschäftsbereich Lithographie-Optik
Abteilung Technologie/Mechatronik
Telefon/Phone: +49 73 64 20 - 9635
Fax: +49 73 64 20 - 82 52
mailto:[email protected]
http://www.zeiss.de/semiconductor
Carl Zeiss SMT AG
Vorsitzender des Aufsichtsrates: Dr. Dieter Kurz
Vorstand: Dr. Hermann Gerlinger (Vorsitzender), Dr. Andreas Dorsel, Justus
Felix Wehmer
Sitz der Gesellschaft: 73447 Oberkochen, Deutschland
Amtsgericht Ulm, HRB 501473, USt-IdNr: DE 811119999
"Pedro M. S. Oliveira" <[email protected]>
Gesendet von: [email protected]
09.09.2010 06:49
Bitte antworten an
[email protected]
An
[email protected]
Kopie
Thema
Re: [Efw-user] PCMCIA/PC Card support removed?
Hi, I'll only be able to properly answer this over the weekend. Sorry for
the delay but my IO capability is over the limit.
I wasn't thinking in building over endian sources but on kernel sources as
I also need vmware support.
So in the end the requisites ARE:
USB network
Vmware network (vmxnet)
Pcmcia
Does anyone need something else?
Cheers
Pedro
On Sep 8, 2010 3:41 PM, "eric rosel" <[email protected]> wrote:
> Hi,
> I have a similar problem, I've run out of ethernet ports and I'm trying
to use USB-to-Ethernet adapters. These adapters I have run properly on
Ubuntu, but aren't working on EFW 2.4.
> The EFW-COMMUNITY sources are still unavailable from the download site:
http://www.endian.com/en/community/download/
>
> Can you please provide some more details on how you were able to get the
sources and compile them with additional drivers?
> Thanks,-eric
>
> --- On Wed, 9/8/10, Pedro M. S. Oliveira <[email protected]> wrote:
>
> From: Pedro M. S. Oliveira <[email protected]>
> Subject: Re: [Efw-user] PCMCIA/PC Card support removed?
> To: [email protected]
> Date: Wednesday, September 8, 2010, 5:47 AM
>
>
>
> #yiv1241236470 p, #yiv1241236470 li {white-space:pre-wrap;}
>
> It's just a sugestion but you can download the kernel source and compile
it the modules you wish...
> If you need some help just tell me.
> Cheers
> Pedro
>
>
>
>
>
------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:
Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user
----------------------------------------
This message is intended for a particular addressee only and may contain
business or company secrets. If you have received this email in error, please
contact the sender and delete the message immediately. Any use of this email,
including saving, publishing, copying, replication or forwarding of the message
or the contents is not permitted.
------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:
Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user
