Thank you all for your help and tips.
I was able to get the Green interface's MAC address back by deleting
the businfotab
file.
I tried to edit the brX files in /var/efw/ethernet/ but unfortunately my
spare server's array controller gave out. The original server's problem was
that a CPU fan had died.
These servers are the old Compaq Proliant DL360's I got from my company
when they were going to recycle them.
I have my machines connected to the Internet with a spare router I have
hanging around. I guess it's time for new hardware and a fresh EFW install.
Thank you all again for the help!
On Wed, Jul 31, 2013 at 11:13 AM, Emiliano Tortorella <
etortore...@ipworkers.com> wrote:
> Hi!
>
> I've never tested what Davy just said, but it would be very useful, let me
> know if it fix your problem.
>
> I'm going to tell you what I do when I need to migrate to another hardware:
>
> 1. I get on the console and identify the network cards with mii-tool
> connecting to them an ethernet cable. With this I can know for example that
> *eth5* is the one that used to be the *green interface*.
> 2. Check in */var/efw/ethernet/settings* witch brX correspond to each
> zone, typically *br0* correspond to the Green interface for example.
> 3. Edit */var/efw/ethernet/brX* to set the correct network card. Using
> the same example in */var/efw/ethernet/br0* write *eth5*
> 4. Reboot
>
> Regards!
>
> Emiliano Tortorella | *ip**Workers* Servicio Técnico
> www.ipworkers.com | Río Negro 1380 Of.1206 | Montevideo | Uruguay
> Tel: (+598) 2902-9843 | Cel: (+598) 91493769
> El 31/07/13 09:39, Davy Jonckheere escribió:
>
> Check this out:****
>
> ** **
>
>
> http://www.surf-it.be/blogs/endian-firewall-backup-restore-different-hardware-eth-fails
> ****
>
> ** **
>
> ** **
>
> ** **
>
> Met vriendelijke groet,
>
> Davy Jonckheere
> Winkelverantwoordelijke JFK Veurne b.v.b.a - Filiaal Veurne****
>
> ** **
>
> ** **
>
> *Van:* Andres Gonzalez [mailto:tuc...@gmail.com <tuc...@gmail.com>]
> *Verzonden:* woensdag 31 juli 2013 13:23
> *Aan:* jerry.miu; efw-user@lists.sourceforge.net
> *Onderwerp:* Re: [Efw-user] Server swap****
>
> ** **
>
> Take a look at: /var/efw/ethernet****
>
> ** **
>
> There it's all the NICs configuration****
>
> ** **
>
> HTH.****
>
> ** **
>
> ** **
>
>
> ------------------------------------------------------------------------------
> Get your SQL database under version control now!
> Version control is standard for application code, but databases havent
> caught up. So what steps can you take to put your SQL databases under
> version control? Why should you start doing it? Read more to find
> out.http://pubads.g.doubleclick.net/gampad/clk?id=49501711&iu=/4140/ostg.clktrk
>
>
>
> _______________________________________________
> Efw-user mailing
> listEfw-user@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/efw-user
>
>
>
>
> ------------------------------------------------------------------------------
> Get your SQL database under version control now!
> Version control is standard for application code, but databases havent
> caught up. So what steps can you take to put your SQL databases under
> version control? Why should you start doing it? Read more to find out.
> http://pubads.g.doubleclick.net/gampad/clk?id=49501711&iu=/4140/ostg.clktrk
> _______________________________________________
> Efw-user mailing list
> Efw-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/efw-user
>
>
------------------------------------------------------------------------------
Get your SQL database under version control now!
Version control is standard for application code, but databases havent
caught up. So what steps can you take to put your SQL databases under
version control? Why should you start doing it? Read more to find out.
http://pubads.g.doubleclick.net/gampad/clk?id=49501711&iu=/4140/ostg.clktrk
_______________________________________________
Efw-user mailing list
Efw-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/efw-user
