currently my network is setup with a typical cable modem connected to my wifi router. router gets a static IP from the modem.
I want to put the firewall between the router and modem. so I setup the red network to match what the router was using to communicate with the modem. I setup the green network as a static IP from my internal network. I connected the modem to the red nic and the green nic to a pan port on the router. nothing plugged into the wan of the router anymore. the end result is I can see the router and the firewall from a computer. however I can not see the Internet. I have the computers setup to grab DHCP from the router. I did try to add both the router and the firewall IPs as gateways on the computer and then it appears to work ok. but I'm wondering if there is a way to set this up where I would not have to make any changes in the computers/devices at all. any thoughts or other info you need about my setup just let me know. thanks ------------------------------------------------------------------------------ _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user
