Hi, I have been trying to get Ekiga working on a Fedora 8 based system. I am using Ekiga 3.0.1 build from a Fedora 10 source RPM. This is being used at home through a ST585 router in NAT configuration.
When ever I tried to run Ekiga I would get the error message in a dialog window: "Ekiga did not manage to configure your network settings automatically. You can still use it, but you need to configure your network settings manually. Please see http://wiki.ekiga.org/index.php/Enable_port_forwarding_manually for instructions" After this the echo test would fail in the receiving direction. I tried to enable port forwarding on my ST585 router to no avail. Strangely it was working at work were we use the same ST585 router, but without NAT enabled (A Linux box does the firewall). After a lot of playing around I used gconf-editor to clear the "stun_server" entry for Ekiga. This cured the problem. What is strange is that Ekiga now also works without the port forwarding enabled in the router ... It appears that the ST585 is doing something special when it sees SIP protocol requests and forwarding the ports automatically, but the use of the STUN system messes this up. If this is the case, It would be useful to be able to disable STUN support in the standard user preferences dialogs of the Ekiga app and to note this in the error dialog window. Also I guess it may be possible to fix the STUN support if there is an issue here ... Cheers Terry _______________________________________________ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list