I'm trying to use Ekiga as SIP client on the same computer I have
asterisk running. I do not have router or firewall in my local network.
Ekiga does not work for me at all. I created SIP account in it, as my
Name, User and Authentication User I have entered my SIP login, as password -
my SIP password, as "Registrar" - IP address of my asterisk SIP server
(192.168.1.2) - the same one I use in my hardware SIP phones. And I get "Could
not register. Method not allowed" (visible in Edit->Accounts).
On start up, after some time, I get message "Could not register
sip:myname@192.168.1.2", and then "Ekiga did not manage to configure your
network settings automatically. ... Please see [link] for instructions". But
the link is about configuring routers which I do not have. I do not have
firewall either. Just network switch and gateway, some other computers and
hardware SIP phones in my local network. And this is probably irrelevant
anyway, because Ekiga and Asterisk are on the same computer.
I use default 5060 port in sip.conf. I have created separate account in
sip.conf for software phone. If I try to use this new account in hardware SIP
phone, it works. But Ekiga does not. If I ignore the errors and try to dial
some phone number (local or global - does not matter), I get "Remote user is
busy" immediately.
If I try to enter in the Registrar field 192.168.1.2:5060, only error I
get is "Ekiga did not manage to configure your network settings automatically
...", and no other errors. But the result is the same: I get "Remote user is
busy" immediately when trying to dial a number.
Asterisk log, even in the most verbose mode, does not show any attempt
to register (or anything else) when I run Ekiga.
Since it looks like there are plenty of people who use Ekiga as SIP
client, I assume I'm doing something wrong. I cannot figure out what exactly by
myself, so I will appreciate any help.
_______________________________________________
ekiga-list mailing list
ekiga-list@gnome.org
https://mail.gnome.org/mailman/listinfo/ekiga-list
