Hi all, I'm hoping to use u-boot for the first time on a custom MPC8270 board, and have hit a problem that I cannot solve. I am very new to Linux, eldk & u-boot.
I've installed Ubuntu 11.04 on a Toshiba Satellite Pro, on an 8GB partition. I've then installed the u-boot sources by running git clone git://git.denx.de/u-boot.git u-boot/ from my home directory. I've then downloaded and installed eldk for the powerpc, as follows: mkdir eldk-download cd eldk-download mkdir -p targets/powerpc wget ftp://ftp.denx.de/pub/eldk/5.0/install.sh chmod 777 install.sh cd targets/powerpc wget ftp://ftp.denx.de/pub/eldk/5.0/targets/powerpc/target.conf wget ftp://ftp.denx.de/pub/eldk/5.0/targets/powerpc/eldk-eglibc-i686-powerpc-toolchain-qte-5.0.tar.bz2 wget ftp://ftp.denx.de/pub/eldk/5.0/targets/powerpc/poky-image-qte-sdk-powerpc.tar.gz cd eldk-download sudo mkdir /opt/eldk-5.0 sudo chmod 01777 /opt/eldk-5.0 sudo ./install.sh -i qte powerpc At this point I believe the eldk should be installed. A quick look at my PATH variable however does not show any paths to the /opt tree added, so I am not surprised that when I run the following in my ~/u-boot directory: make distclean make ep82xxm_config make all I get the following: _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
