Hi guys, my K1 is picking up hash on most bands from a pc which is in the
upstairs bedroom about 12 feet away. After conducting a few tests I have
found that the radiation is from the monitor lead. With the monitor
switched off and lead connected the hash is still there but if I disconnct
the lead from the pc the hash drops significantly. The lead has the normal
split ferrite on it and I had another one in the box so tried that but with
no difference. Is it worth me buying a large ferrite ring and trying to
wind a few turns on it. On the monitor end the lead is not disconnectable
and at the PC end has a moulded-on multi pin plug which means you need a
fairly big ferrite ring to get the plug through (not cheap).
Anybody have any advice?
73's
Martin
M0KWV
K1 #1534
Why not take a look at our Web site?
http://www.simoncarves.com
*************************************************************************
The information in this email and any attachments may contain
privileged and/or confidential information intended solely for
the use of the individual or entity to whom it is addressed.
If the reader of this email is not the intended addressee, or the
employee or agent responsible to deliver it to the addressee,
you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited.
If you have received this communication in error, please notify
me by telephone or email and delete all copies immediately.
*************************************************************************
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/elecraft
You must subscribe to post.
Subscriber Info (Addr. Change, Unsub etc):
http://mailman.qth.net/subscribers.htm
Elecraft page: http://www.elecraft.com
