SN4355 has the resistors on the strip. So far, so good, I'm past the initial checks on the RF board (i.e. my control board and front panel work).
I got an incredible headache sorting the caps. My wish for future builders: sort parts in a more sensible order so the RF board parts are divided into the stages. I know that means more labor at Elecraft, but so far that's my main complaint. :) On Sun, 4 Jul 2004, Don Wilhelm wrote:
Bill, Elecraft continually improves things - we all know that. So now you will find R50 and R58 on the strip of resistors - at least they were that way for SN4192 when I assembled it. Yes, it has not always been that way - those resistors were previously shipped loose in the RFb bag, so your memory is working well. 73, Don W3FPR Life is what happens when you are making other plans ----- Original Message ----- Just completing inventory check for my second K2 (#4313)all well except can't find R50 and R58 (both 1/2 watt so not on the bandolier) are these normally loose in the RFb bag? or do they lurk in some other spot and I've had a senior moment and missed them?. I wouldn't normally bother the reflector for two R's but R50 is 1.5 Ohms and low values not easy to come by here. TIA Bill / VK4SQ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
-- Hisashi T Fujinaka - [EMAIL PROTECTED] BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com