PE3BB de G4DMP
I would suggest....
1. KNB2 Noise blanker
2. K160RX 160m/2nd Ant
3. KSB2 SSB
Do those first, as they do not attached to the top cover.
then..
4. KAT2 ATU
5. KBT2 battery option
Once these are all working correctly, then add..
6. KIO2 I/O Option
and finally, the
7. KAF2 AF filter/RTC
Be mindful of the various links and component changes that need to be
done when adding the options. (Tack them in with the minimum of solder
and without bending the wires over)
I hope that helps.
73 de David G4DMP
In a recent message, PE3BB <[EMAIL PROTECTED]> said....
I started to build the K2. Can anyone recommend a sequence for adding the
options:
- k2 noise blanker
- k2 SSB
- k2 rs232-i/o option
- k2 Audio filter and RTC
- k2 antenna tuner
- k2 160m & 2nd antenna option
- k2 internal battery option?
I appreciate all input.
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com