I wonder if my K2 (Serial # 2424 with latest mods and software) is set up correctly and would appreciate comments. Output power with CAL CURR set at 3.0 amps is as below. Increasing CAL CURR to 5 amps makes little difference. I know that the K2 is basically a 10 watt rig and I get more on some bands, but the upper bands do not achieve this. When using the K2 with my KW1000 Linear Amplifier a watt or two makes a difference. 80 Meters = 13.0 watts out 40 Meters = 10.0 watts out 30 Meters = 12.0 watts out 20 Meters = 11.0 watts out 15 Meters = 8.0 watts out 12 Meters = 9.5 watts out 10 Meters = 7.0 watts out
Thanks in advance for your advice - Larry (G0IKE) _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
