I must be doing something wrong. Have my BFO settings exactly as
specified in the K2 manual on CW. Using the noise gen from Elecraft.
However, during the BFO settings per the K2 manual, FL2-FL4 at the BFO
settings they specify results in almost no audio coming from the speaker
using the N-gen. Then, when I go to spectrogram, my entire curve for
FL1 is to the right of 600Hz on this display and no matter what I do
with the vfo knob, there is no shifting of the curve to speak of and
just changes in amplitude. On FL2-FL4, there is no amplitude at all but
I can then adjust the VFO and see/hear the Ngen signals coming thru but
the entire curve is still to the right of 600Hz. Running spectrogram
off the headphone jack to my sound card.
During operation, my CW mode audio level is considerably below the LSB
or USB level and my receive CW signals seem to turn to clicks at audio
freq below 800Hz or so.....what have I missed?
Thx
K5GUS
Dan
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
