From: "Tom Althoff" <[EMAIL PROTECTED]> Date: Mon, 3 Jan 2005 19:20:04 -0500
It would be nice if there were side panels to do that plus a modified top cover on the KAT100-1 with recessed cups for the 4 feet of the K2 to drop down into so that when all was said and done the radio/tuner would become one unit, solid side panels and flush with no gap between them along the front mating edge. And wouldn't it be cool if the IO buss could be passed down directly into the KAT-100 instead of tying up the DB-9 connector at the back of both units. Note that there is an airvent on the bottom of the K2 for cooling the low power PA transistors, so airflow to that probably needs to be maintained. Otherwise you could just remove the feet of the K2. Maybe if you also removed the top cover of the KAT-100? Mine is loaned out, so I can't actually look at them. 73, doug _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com