Ooops. Never mind Parts, WA7BOC pointed out the error of my ways. I
found them.
See, the old wise man was right!
Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
-----Original Message-----
From: Roger Stein [mailto:[EMAIL PROTECTED]
Sent: Friday, January 21, 2005 11:06 AM
To: 'Stan Rife'
Subject: RE: [Elecraft] K1 missing parts - is this to be expected?
Hi Stan,
Those pesky little guys are the yellow ones with a dark red/brown lettering
on them.
They have short leads, about 1/2" or so, lead spacing 0.2". I set them aside
during inventory with the
blue square/rectagular 'N' value caps and was 'bewildered' for a few moments
until I
found where I had placed them!!
I am at the point of checking parts for proper orientation and ready to do
the first batch of
resistance checks. What fun!
73, Roger WA7BOC K2 #755
Montesano, WA
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Stan Rife
Sent: Friday, January 21, 2005 7:38 AM
To: elecraft@mailman.qth.net
Subject: RE: [Elecraft] K1 missing parts - is this to be expected?
It also could be that the parts are in another bag, or laying loose
somewhere. I had this happen. I thought I was short one capacitor. Everyone
kept telling me this was an exception. I called and Scott mailed the
component. I went ahead with assembly as this cap was later on down the
assembly. Guess what, the cap was stuck to the back of the black foam that
the IC's were shipped on. Talk about egg on my face.
Moral: Wise man say part may not be where supposed to be, but part
more than likely IS there...keep looking.
I am assembling the KPA100 kit right now and I can't find either of
the 100pf caps C41 & C95. I sent an email off to parts. I hope I am not
wrong again.
Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of W3FPR - Don Wilhelm
Sent: Thursday, January 20, 2005 8:20 PM
To: Craig Rairdin; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K1 missing parts - is this to be expected?
Craig,
WOW - After assembling many Elecraft kits, I can say with certainty that you
have run into an exception.
Most of the time I only inventory the critical parts (the ones for which I
don't have replacements on hand) and begin assembling. Only a few times
have I had to dig into my spare parts bins. (Even so, I recommend against
anyone else doing what I do unless they too have a resource for extra
parts).
Complete you inventory and call (or e-mail) [EMAIL PROTECTED] and Scott
will likely put everything you need in a care package for you and ship it
promptly. It certainly does sound like 'Christine' was somehow distracted
when parting your kit.
73,
Don W3FPR
----- Original Message -----
> Just spent my first hour with my K1 kit. Here's what I'm missing so far:
>
> 2 - Thermal insulator, TO220; for Q6, Q7 (RF BOARD)
> 1 - Acrylic display bezel; for LCD (Front Panel)
> 1- 2N7000 transistor, TO-92 plastic
>
> I have two extra resistors.
>
> That's just the "Packing Box Parts List" and the "Front Panel Board Parts
> List".
>
> I'll call in the AM for replacements, but holy cow. Does it get better? (I
> hope!)
>
> Who is "Christine" and how much did she have to drink before she packed my
> kit? :-)
>
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
