Chuck Gehring wrote:
I need some recommendations. The KDSP2 instructions state to install C5,
C8,C3, and C4 with the capacitor flush to tje PCB with the exposed leads not
more than 1/32" (1mm) above the PCB. Could someone please tell me how they
accomplished this task. The best I can mamage without cracking the ceramic
around the leads is 2/32" Pictures would be great.
The kits sometimes contain capacitors whose leads are 0.2" spacing
rather than 0.1" spacing. The capacitor manufacturer then bends the
leads inward with a little "jog" and they come out as 0.1".
I just checked the clearances on the KDSP2 PCB and 1/16" of an on the
capacitor leads should be OK.
73,
Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
