Hello! There will always be a cross-talk between antenna ports on KAT100. If u put on unused antenna port some 50 ohm dummy the crosstalk will be lower. I did measure crosstalk between ports on my KAT100 now aprox results are:
28Mhz 35 dB with unterminated ANT 2 port and around 40dB with terminated... I suppose the crosstalk on lower bands is better! 73's Adi -K2-3204 ----- Original Message ----- From: "Mike Walkington" <[EMAIL PROTECTED]> To: "Elecraft-Reflector" <elecraft@mailman.qth.net> Sent: Monday, January 24, 2005 12:17 PM Subject: [Elecraft] Strange K2 Behaviour - KAT100 Antenna Isolation > Hi All, > > Continuing the theme of describing strange K2 behaviour! My KAT100 is > remotely installed in an EC2. I use ANT1 with nothing connected to the 2nd > antenna socket. Recently I noticed that having tuned in a relatively strong > station on ANT 1 and switching to the 2nd antenna (ie by pressing ANT1/ANT2 > switch) that I could still hear the station even though there is no antenna > connected to ANT2. This made me wonder what the isolation is between the > two antenna sockets and if anyone has measured it or whether I have a > problem that I need to locate and fix. Sorry, but I haven't yet swapped the > antenna to see if the behaviour reciprocates. > > Mike > VK1KCK > K2 #2599 > > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
