Awesome! Thanks for thinking of us non-Windows users. On January 29, 2005 7:20 pm, Eric Swartz WA6HHQ - Elecraft wrote: > It can also be done manually by copying the hex file to the KRC2 with an > ASCII terminal program via your system's serial port. It will require > you to set your terminal program to delay approximately 200 ms after > each carriage return. > > Some additional command strings need to be added to the beginning of the > hex file (using a text editor) or sent manually to put the KRC2 into > download mode. I'll put together a short instruction sheet and get it up > on the web page in the next couple of days. > > 73, Eric > > Darrell Bellerive wrote: > > How does one download the firmware to the KRC2 if one does not use > > Windows as an operating system?
-- Darrell Bellerive Amateur Radio Stations: VA7TO, VE7CLA Grand Forks, British Columbia, Canada _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com