Hello all (again). I'm attempting to align the VCO and am having trouble making it lock on all bands or get to the right voltage range. I've verified all components on the board and touched up the solder on the pertinent components and relays (and verified all paths/continuity), but nothing changed. Here are the voltage values I get when attempting to set L30:
Low High 80M 1.937V 6.000V 40M 8.000V 8.000V 30M 0.597V 0.710V 20M 0.589V 1.148V 17M 3.054V 3.250V 15M 1.962V 2.944V 12M 1.131V 1.251V 10M 2.336V 4.060V No setting of L30 will cause 40M to lock. I also hooked up the frequency counter to TP3 per a suggestion previously on the list and it measured 8.something MHz on 40 (which doesn't seem to be right. I adjusted the spacing on the turns of T5, either pushing them apart or moving them closer. I was able to bring the lower 20M voltage up to 1.5V, but then the VFO wouldn't lock on 80. Thanks in advance for any help you can provide. (And thanks to Don for correctly surmising that my previous problem was due to a thermistor board issue.) tim -- Tim Cailloux W4EGT _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com