Brent, As long as it is 'sort of' vertical and its feet are securely soldered to the pads, there will be no problem. It is difficult to get it exactly vertical in most cases. I would think that it should not be leaning over so far as to contact the resistors.
73, Don W3FPR > -----Original Message----- > > I am in the process of building my KPA-100. On page 36 of the manual I am > installing C83. The instruction says "Place C83 in exactly the position > shown..." Now the problem, I don't have the room to get C83 in the vertical > position. While winding T2, one of the turns crossed over the other, and > the windings may be slightly longer because of this. I have C83 mounted but > it is not vertical as shown. It is mounted at a slight angle. > > Question; Do I need to rewind T2 or will I be OK? > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005 _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
