Hello all. I have gotten my K2 assembled and stated aligning the filters using Spectogram and the VFO stopped working. I reworked any suspicious solder joints to no avail. I discovered with the help of a friend with a scope that the encoder had failed. I replaced the encoder and discovered I have no power out on any band at all. I get HIGH CURRENT every time I hit tune and only .4 watts out on the meter. I ran a ground check on Q19 and the results are G= 96.7 K ohms, S=240.8 ohms, and D=276.2 ohms. I reworked the solder on R20 and RFC14 with no effect. Any suggestions will be greatly appreciated. 73
Daniel Grizzard Extra Class af4lb ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
