If the feedline antenna combination is such that a 1.5:1 segment is only 20 kHz wide (a common enough occurrence) then one should take the time to get tunings up and down. You can probably do it in a couple of minutes. The K3 will shift seamlessly with your operating after that. One of the benefits.
73, Guy. On Sun, Aug 1, 2010 at 3:10 PM, Steef PA2A <p...@xs4all.nl> wrote: > Hi, > > On 80 meters I did some tuning and when I try the SWR about 12 KHz lower the > tuner produces an extra click and the SWR is terrible again. It seems the > tuner remembers segments of about 20 KHz. > > Is it possible to keep the tuner in its tuned settings so it is not necessary > to tune the complete band in 10 or 20 KHz steps? > > 73 's > > Steef PA2A, K3 # 4654 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html