There is a repeatable problem in the P3 display of the "bandwidth" cursor in AFSK A and FSK D data sub-modes. In both submodes the VFOs (correctly) display the RF frequency of the MARK (as set by "Pitch"). However, the P3 displays the filter limits as if the mark frequency were always set to 915 Hz, that is it does not make use of the IS; data from the K3. Instead P3 appears to ignore IS in AFSK A and FSK D (uses a fixed IS=1000). This results in a display error of -(IS - 1000) for other mark frequencies.
The error does not appear to be related to the choice if PB Control (0.5 | 0.1) or the use of the K3 extended command set by any external software. K3 FW 4.05, P3 FW 0.28 73, ... Joe, W4TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
