Given the similarities between the K2 and K3 command sets, one should
not need more than the Clifton Research Z-100000 buffer to bring out
the K2 IF and select the proper IF frequency in the P3. The radio
data rate would need to be changed to 4800 bps (only rate supported
by the KIO2) and the VFO cursors (bandwidth) might not act correctly
due to differences in the FW/IS commands ... the only showstopper
would be the data rate issue.
73,
... Joe, W4TV
On Thu, 2010-08-12 at 09:18 +0200, Heinz Bärtschi wrote:
> It would be fine if the P3 could provide a configurable
> "K2 emulation mode" to communicate with the K2 and to support an
> appropriate (sub-)set of the exciting P3 functions in conjunction
> with the K2.
> Any pros and cons?
>
> 73, Heinz HB9BCB
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
