Hi everyone, I am attempting to do a TX Gain Calibration and every time that I have attempted it so far, I get the following response from the K3 Utility.
-------------------------------------------------------------------------------- Starting 5 watt calibration Calibrating at 1.900 MHz Calibration power settled at "13.5 V ;" Elapsed time: 12 seconds Tx Gain calibration failed because transmit power did not reach the expected value 5 watt calibration failed -------------------------------------------------------------------------------- I get the same error if I bypass the 5 watt test and go straight to the 50Watt test. I have tried it with the radio running on a battery and with a regulated power supply. I am using the latest version of the K3 utility. Any idea's? Jeff Cochrane VK4BOF East Innisfail QLD Australia ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html