Sorry, folks, the instruction manual clearly stated "BAR graph" and when I switched to it everything worked just fine!!
Elecraft - 1; WB2LQF - 0 Stan Levandowski WB2LQF HF QRP CW -- Doing more with less for over 50 years! QCWA #35038 OOTC #4558 NAQCC #4740 SKCC #6488 FISTS #14992 On Mon, Sep 27, 2010 at 6:21 PM, stan levandowski wrote: > I just finished my KAT2 for my K2 #6980. According to p. 19 of the > instructions, my KAT2 is supposed to automatically reduce power to 3 > watts if my power control is set higher during the autotune, if my > firmware revision is higher than 1.05 on the K2 Main Microcontroller. > My firmware is Revision 2.4. > > But it doesn't look like the KAT2 is reducing power during the > autotune. > > Just wondering if anyone else has experienced a similar situation. No > big deal; I can just do it myself, but thought I'd ask. > > Other than the above, the KAT2 seems to be working very, very well > especially since it was able to resolve a 12:1 SWR on a 40 meter > dipole that was resonant on 6.6 mHz. Don't ask...that's another > story. > > > > Stan Levandowski WB2LQF > HF QRP CW -- Doing more with less for over 50 years! > QCWA #35038 OOTC #4558 NAQCC #4740 SKCC #6488 FISTS #14992 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
