I went to the web site run by AA5AU and checked his RTTY page. All you ever wanted to know about RTTY, but were afraid to ask.
Now for the K3. I used MMTTY software, and use the serial cable for rig control and PTT. I had to tell MMTTY that I was using SOUND card for TX. Set the K3 mode to DATA, and the data mode to AFSK A and 45 baud. Connect your sound card to the radio in/out jacks and you are ready to rock-n-roll. ...bc nr4c -----Original Message----- From: Tom Meier [mailto:tomk...@gmail.com] Sent: Tuesday, September 28, 2010 5:32 PM To: elecraft@mailman.qth.net Subject: [Elecraft] [K-3] RTTY for Dummies Has anyone got a *reallly simple* checklist for setting up the K-3 to run RTTY. I'll use MMTTY and I'll use AFSk and I will *not *use an outboard interface like Rigblaster, etc. I mean really simple as in Step 1: Turn on the radio. 73 de Tom (K7ZZ) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html