Werner, Just a guess, but most devices like that have a relatively high input impedance - that means you should be able to connect both tip and ring together, bridging both channels of the audio amp in the K3.
Check the specs on the speaker - if it states that the input impedance is low, then just connect the tip and the shell. Definitely, change the plug to a stereo plug no matter what else you do - you will stress the audio amp if you short its output. 73, Don W3FPR On 10/27/2010 3:36 AM, Dr. Werner Furlan wrote: > I have a BHI noise reduction speaker, this speaker has a cable with a mono > plug. (3.5mm, sleeve and tip) I have learned that this plug should not be > used with the K3. > My question: when I exchange the speaker cable with a stereo plug, should > I leave the ring unconnceted or is it better to connect left and right > channel (ring and tip) to the BHI speaker? > > 73! de Werner OE9FWV > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html