Robert, Do you have the sideband set correctly? - both MMTTY and the K3? How about the mark frequency? - they must match.
73, Don W3FPR On 10/27/2010 8:38 PM, Robert Seymour wrote: > I changed out my old Dell for a newer and faster dell OPtiplex GX620. Now I > can not get MMTTY to run. I first started with the newer 1.68 version but > then went back to 1.65 which was running fine on the old machine. Still not > go! The Sound card in the GX620 is Analog Devices Sound Max. > I am getting audio into the soundcard because I can hear it on headphones on > the PC Line Out port. My K3 is set up OK because it will decode RTTY and > display it. Instead of two-ring figure for the MMTTY XY plot, I only get a > blob and jibberish printing out. When running WriteLog, the sound card is > able to take WAV files and input them to my K3 transceiver. So the sound > card is not totally dead. I have been over and over the MTTY setup and am > confident that the setup is OK. Of course I could be missing something. I > am beginning to suspect the motherboard mounted sound card is messed up. Any > tips/tests will be greatly appreciated. My next step is desperation and to > try an outbouard USB sound card. I read some reports that this might be > better anyway. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html