Hi all, got my K3 just a couple of months ago. I'm using it with a Micro Keyer II. 90% of the time I'm on rtty. I've tested the setup extensively and everything runs pretty smooth except: randomly in the middle of a transmission PTT will simply freeze and the only way out is to switch the K3 off. Switching it back on and wait a few seconds will unlock the frozen N1MM-MMTTY software and operation resumes normally. Sometimes though I have to shut down N1MM and restart fresh. Now the second thing that happens (not as often) is a PTT freeze followed by computer shutdown and bluescreen error message before automatic reboot. I run SO2R setup with other radio being a 756 pro2 and Rigblaster plus. This never happened on this setup. As a matter of fact, whenever the freeze takes place, the second radio and its N1MM-MMTTY software are still running and not affected in any way. I've looked into all kinds of possible rfi issues to no avail. This may happen 3 or 4 times during a contest. I was wondering if setting a separate PTT virtual port instead of using the same as fsk may be helpful. Thanks.
----- 73, Fabi va2up -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-MKII-PTT-freeze-tp5681196p5681196.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
