Hey Joe, I make a number of enclosures for Elecraft's line of mini-modules. They are made of clear polycarbonate which is about 250 times stronger than glass and they show off your hard work quite nicely.
I have never advertised them, but last spring I made up a line of enclosures to cover the test bench modules (i.e. XG2, NGen, CP1 etc.). At the request of a couple of hams, I made them the same size and height so that they may be stacked on each other to reduce the amount of footprint on the bench when not in use. I externalized BNC connections and jacks where applicable and provided a sliding top for access to other controls on the various boards. The sliding top is held in the closed position with magnetic strip. I made a few of these for a few hams who all reported they like them. I can send you some pics if you like. I'd price them out at $15.95 a piece with $8.50 S&H. I can certainly put 2-3 in the same shipping box if you desire enclosures for other test modules to save on the shipping. Here is a link to my enclosure page for the other enclosures I make so you can get a feel for what they might look like: http://w8fgu.home.comcast.net/~w8fgu/enclosures.html Feel free to email me offline if you have any questions. Take care & 73, Dave W8FGU On 10/29/2010 6:17 AM, Joe G wrote: > > Can any one suggest a case for the XG2 > > Joe > W1JGS > > ----- > Joe > W1JGS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
