Make sure you checked 'LOAD ALL' in K3Util when loading f/w into the K3. You must always include the fpf and other files when upgrading. All are in the beta .zip file.
73, Eric www.elecraft.com _..._ On Nov 6, 2010, at 5:01 AM, dalej <dal...@mac.com> wrote: > I loaded beta 4.18 again direct to the K3 bypassing P3 and same problem with > crackling audio. I now reverted back to beta 4.17 and all is fine again. > > 73 > Dale, k9vuj > S/N 2268 > > > On 06, Nov 2010, at 6:13, dalej wrote: > >> I just loaded this beta version 4.18 and now I get loud crackling from the >> speaker when tuning though the APF filter, also, the audio goes away. I >> uploaded the firmware though the P3 twice, once power on P3 and the second >> time power off with the same results. I will next try loading the firmware >> directly into the K3. If I have the same result, I will then revert back to >> the previous version, beta 4.17, which worked fine including the power out. >> >> 73 >> Dale, K9VUJ >> S/N 2268 >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html