Using the Y cable in the serial feed from the P3 to the K3 works here. Perhaps something has changed in your setup? I now prefer using LP-Bridge to feed the SteppIR because it sends the tx frequency to the SteppIR when working split.
73, Pete F5VNB On 12/11/2010 23:37, zumbr...@comcast.net wrote: > Good afternoon to the group. How do I configure the K3, P3 and SteppIR > controller so that the K3 P3 will cause the SteppIR to change bands. Before > the P3 I had no trouble controlling the SteepIR with the K3. 73, Steve > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html