Thank you Joe. That really puts my mind at ease. Vy 73, James K2QI
On Fri, Dec 3, 2010 at 12:49 PM, Joe Subich, W4TV <li...@subich.com> wrote: > > With that said, is it safe to bridge the L&R channels coming out of >>> the K3'sphone jacks, front or rear panel without fear of damaging >>> >>> the amplifier? The ANEM presents a 22 ohm load to the K3. >>> >> > Yes, it is safe to sum the *headphone* jacks since both the front and > rear panel headphone jacks include 8.4 Ohm resistors in series with > each (tip and ring) output. > > *WARNING* do not sum the Speaker output or use a mono cable in the > speaker jack as the speaker output does not include any resistor and > shorting an output (or driving power into an unused output) can > destroy the speaker amplifier. > > 73, > > ... Joe, W4TV > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html