Yeah, I understand that. I was just wondering how close they might be since I don't have a clue what the tolerance is of the crystals used by Elecraft. Specifically, I was wondering if they would be close enough (typically) to use for in-band IMD tests as a function of AGC settings. Or at least close enough that whichever one was higher in frequency could be easily padded down to within a few tens of Hz or so of the other.
73, Dave AB7E On 12/11/2010 7:22 PM, Don Wilhelm wrote: > Dave, > > The frequency accuracy of the XG2 will vary with the individual > crystals. It is not specifically for frequency accuracy, but for > level accuracy. > > In other words, I would not depend on the XG2 for any sort of > frequency calibration unless you measured the output of a particular > one with a calibrated frequency meter. > > 73, > Don W3FPR > > On 12/11/2010 9:00 PM, David Gilbert wrote: >> Does anyone know the typical frequency accuracy of the XG2? If I had >> two XG2's, what would be the typical separation in frequency between the >> two of them at the 14060 setting? >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
