Mark, More on the K2 barefoot + ALS-600 from the Elecraft reflector. Dick Jim Brown wrote:
>On 12/22/2010 9:44 AM, Derf Mockford wrote: > > >>The amp is very >>stable and all mods took about 3 hours to complete. >> >> > >If you're running the barefoot K2 higher than 10 watts, you should >probably take a careful look at the output of the ALS600 on a good >spectrum analyzer. I've heard good engineers familiar with the K2 say >that it's spectral purity degrades above 10 watts, which is why Elecraft >considers it a 10W radio. > >73, Jim K9YC > > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html