any chance of recording the CW audio on a DVR and replaying and recording into one of the memories with the K3 DVR? then jkust play it back on the air.
...bill nr4c Quoting Richard Ferch <ve3...@storm.ca>: > Scott, > > If Ralph's guess is correct, there is a configuration option to do this > offsetting automatically: look at the CONFIG:CW WGHT option in the > manual and try setting the automatic VFO offset (tap 5). Note also that > on 30m and above you will want to use MD7 and MD2 instead of MD3 and MD1 > in your macro command string. > > 73, > Rich VE3KI > > VE7XF wrote: >>> Most of it works except it stays in transmit and the CW "beeps" at the >>> operating station but only sounds like a series of clicks over the air... >> >> Here's my guess, Scott: >> Perhaps it's working, ie. sending CW over the air, but it is zero beat with >> the SSB frequency, and therefore nobody hears anything. You need a 700hz >> (or thereabouts) offset, in a direction compatible with whatever sideband >> you're using. >> >> Remember, it's just a guess - I know nothing about macros. >> >> Ralph, VE7XF > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
