Hi The TenTec handheld microphone works great with the K2. It comes with a 4 pin connector that you will need to change to the 8 pin connector for the K2. This mike works fine with the 5.6K bias resistor from the 5 volt supply to the AF pin, just like the MH2.
I have also used the TenTec desk mike on the K2, however it really needs 8-9 volts rather than the 5 volts provided by the K2. You can use the internal 9 volt battery or jumper over to the 8 volt supply in the K2. Don Brown KD5NDB ----- Original Message ----- From: "Paul Saville" <[EMAIL PROTECTED]> To: <Elecraft@mailman.qth.net> Sent: Wednesday, May 25, 2005 9:42 PM Subject: [Elecraft] MH2 Microphone Discontinued > The MH2 is now listed as discontinued. Will there be an Elecraft-branded > replacement for those who don't fancy "pop star" type microphones? > > 73 Paul ZL3IN > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
