Putting the tuner at the base will be much more efficient than using the autotuner (or any tuner) at the rig end. If the tuner is at the base you will not need the unun.
As someone mentioned there was a huge discussion of this type of antenna a few weeks ago. Lots of 'attitude' was displayed. My recommendation is that you should install a ground system of at least 16 radials perhaps 20' long each (this is a 'minimum' ground system) and, if possible, use a remote tuner at the antenna base. On 3/21/2011 2:11 PM, tjke...@windstream.net wrote: > I have just gotten (but have not yet installed) an S9 43' vertical with > optional 80m coil. I am wondering if I will need an auto-tuner at the > antenna or if the K3's atu is sufficient? Also the instructions call > for a 1:4 unun. Can anyone point me a description of how to build > one? And finally, if anyone has used an S9 with a K3, what has been > your experience? > > Thanks and 73, > > Tom > W8TJK -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html